Mackie SRM150 Specifications

SRM150 SPECIFICATIONS
System Specifications
Frequency Response (–3 dB)
Frequency Range (–10 dB)
Max SPL Long-term @ 1m
Max SPL Peak @ 1m

Mixer Section

Frequency Response (–3 dB)
Mic Input to Line Out (Gain at 0 dB)
Input Impedance
Mic
Hi-Z
Instrument
Line
Stereo
Maximum Voltage Gain
Mic Input 1
Mic Input 
Stereo Input
Maximum Input Level
Mic
Line
Stereo
3-Band Equalization
High
Mid
Low
Line Out Pad
Common Mode Rejection Ratio (CMRR)
Noise (0 Hz to 0 kHz BW, 150 ohm source impedance)
Equivalent Input Noise (EIN)
Residual Output Noise
(Line out, channel and master levels off)
Power Amplifier
Rated Power
Maximum Power
Rated THD
Cooling
Design
16
100 Hz – 17.5 kHz
60 Hz –  kHz
110 dB
10 dB
5 Hz – 0 kHz (+0, –1 dB)
 kohm balanced
0 kohm balanced
1 Mohm
10 kohm balanced
10 kohm balanced
51 dB
51 dB
9 dB
–8 dBu, gain at +50 dB
+15 dBu, gain at +6 dB
–8 dBu, gain at +0 dB
+5 dBu, gain at –15 dB
+0 dBu, gain at 0 dB
±15 dB @ 1 kHz
±15 dB @ .5 kHz
±15 dB @ 100 Hz
–0 dB
55 dB @ 1 kHz, gain at unity
–19 dBu
–85 dBu
100 watts rms continuous,
0 Hz to 0 kHz
150 watts peak
0.05%
Convection Extrusion
Class D
Transducer
Diameter
Voice Coil Diameter
Sensitivity (1W@1m) 90 dB
Nominal Impedance 8 ohms
Power Handling
Frequency Range
Magnet Type
Safety Features
Overload Protection
Thermal Protection
Construction Features
Material
Finish
Handle
Grille
Physical Properties
Height
Width
Depth
Weight
Mounting Methods
AC Power Requirements
100 VAC – 0 VAC, 50/60 Hz, 5 VA
AC Connector
Disclaimer
Since we are always striving to make our products better by
incorporating new and improved materials, components, and manu-
facturing methods, we reserve the right to change these specifica-
tions at any time without notice.
"Mackie." and the "Running Man" figure are registered trade-
marks of LOUD Technologies Inc.
All other brand names mentioned are trademarks or registered
trademarks of their respective holders, and are hereby acknowl-
edged.
©006 LOUD Technologies Inc.
All Rights Reserved.
5.5 in/1 mm
1.0 in/5. mm
150 watts
90 Hz – 0 kHz
Neodymium
Limiter
Amplifier shutdown, auto-reset
Polypropylene
Grey textured finish
Top mounted
Perforated metal with weather-
resistant coating
8.0 in/0. cm
11. in/8. cm
6.8 in/17. cm
7.6 lb/. kg
Mic stand mountable via the built-in
socket on the bottom of the cabinet
with the supplied adapter.
-pin IEC 50 VAC
R