Cisco 7941G User Manual page 80

AutoAnswer with Headset or Speakerphone
If you...
Use AutoAnswer
with a headset
Use AutoAnswer
with the
speakerphone
Tip
AutoAnswer is disabled when the Do Not Disturb feature is active.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
64
Then...
Keep headset mode active (in other words, keep
not on a call.
To keep headset mode active, perform the following actions:
• Press EndCall to hang up.
• Press New Call or Dial to place new calls.
If your phone is set up to use AutoAnswer in headset mode, calls are automatically
answered only if is illuminated.
Otherwise, calls ring normally and you must manually answer them.
Keep the handset in the cradle and headset mode inactive (
Otherwise, calls ring normally and you must manually answer them.
Handset, Headset, and Speakerphone
illuminated), even when you are
unlit).