Cinema Projector: User Manual
iS15-2K
USB
USB Type A is reserved for future expansion.
USB type B can be used to connect to a computer, using a standard USB cable.
Remote Control 1
Connect the Remote Control (supplied) to this socket.
Remote Control 2
An external switching unit (not supplied) can be connected to this socket.
PC Control
The projector can be controlled from a computer via a serial connection, using a
standard RS232 cable (not supplied).
PC Control T
Service or Installation personnel can use this serial connection, to perform
advanced setup functions.
General Purpose Input/Output (GPIO)
For future expansion.
PC adaptor card slot
A PC adaptor card can be inserted here including:
•
memory card, for firmware updates (supplied)
•
wireless network adaptor card, to control the projector from a computer.
General
PC control-T
purpose I/O
(out of view)
page 2.29
2. Installation
Notes
For more information about
control input connections see
Connections, in section 6.
Appendix.
For more information about
controlling the projector from a
computer, see your provider.