Table of Contents
Advertisement
Setup
M
Because there can be a difference in the effectiveness of HLC according to the amount of light
area in the screen, optimize the installation angle for the best HLC performance.
In a dark environment, the HLC is only activated when a high light that is larger than a certain area
is present.
The HLC is not activated in day light or when bright light is not present at night. (In NIGHT ONLY
mode).
Since the performance of the WDR function may be affected by the area of the bright part of the
screen, optimize the installation angle for the best WDR performance.
If you increase LIMIT, the screen display may be distorted.
If you use the VPS (Virtual Progressive Scan) function, the CCD reads differently so you can not use
WDR simultaneously. If you set VPS to ON, WDR will be automatically set to FIXED Mode.
SSNR3
This function reduces the background noise in a low luminance environments.
1.
When the SETUP menu screen is displayed,
select 'SSNR3' by using the Function Setup
switch so that the arrow indicates 'SSNR3' .
2.
Select a desired mode using the Function
Setup switch.
Off : Deactivates SSNR3 so that noise is
not reduced.
ON : Activates SSNR3 so that noise is reduced.
Set the SSNR3 mode to 'ON' and press the
3.
Function Setup switch. Then you can adjust
the noise reduction level.
24_ Setup
< WDR ON >
< WDR OFF >
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
▶ 5.SSNR3
6.DAY/NIGHT
SSNR3
▶ LEVEL
IIIIIIII IIIIIIIIIIIII
RETURN
DC
ATW
OFF
ON
AUTO
15
Advertisement
Table of Contents
