Grizzly G5347 Instruction Sheet

EYE/EAR INJURY HAzARD!
Wear safety glasses and
hearing protection when
using this tool!
Always disconnect tool from
air to prevent unexpected
operation during service!
DO NOT EXCEED 120 PSI!
Exceeding this PSI may
result
damage.
SHATTERING
Use
impact wrench use only.

Specifications

Drive Size .........................................................
Bolt Size Capacity ...........................................
No-Load Speed ................................... 7000 RPM
Maximum Torque .................................... 400 ft/lb
Air Inlet Size ............................................
Air Consumption ..................................... 4.5 CFM
Operating Pressure ................................... 90 PSI
Weight ..........................................................6 lbs.
Operation
Attach any ⁄ " drive socket onto your air impact
1
2
wrench. To change the rotational direction, push
the air valve knob. To adjust the torque setting,
turn the air valve knob from 0 to 5, 5 being the
highest setting (Figure 1). Connect the impact
wrench to an air line regulated at 90 PSI.
WARNING: NO PORTION OF THIS MANUAL MAY bE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROvAL OF GRIzzLY INDUSTRIAL, INC.
INJURY HAzARD!
in injury/tool
HAzARD!
sockets rated
/ " NPT
1
4
COPyRIGhT © MAy, 2008 By GRIzzLy INDuSTRIAL, INC.
#JM10778 PRINTeD IN TAIWAN
⁄ " EXTREME DUTY
1
2
IMPACT WRENCH
INSTRUCTION SHEET
Air Supply
for
The impact wrench MuST be regularly lubricated.
Place 3-4 drops of air tool oil directly into the
air fitting before each use. For best results, we
recommend using an in-line filter, lubricator, and
/ "
1
regulator, as shown in Figure 2.
2
/ "
9
16
Quick
Connector
Your
Tool
Quick
Coupler
If you need help with your new pneumatic tool,
call our Tech Support at: (570) 546-9663.
MODEL G5347
Figure 1. Model G5347
Quick
Lubricator
Connector
Quick
Air Hose
Filter
Coupler
Figure 2
Installing your tool.
.
Air Valve
Knob
Regulator
Air
Compressor