grounding requirements
GROUNDED
6-20 RECEPTACLE
6-20 PLUG
figure 3. typical 6-20 plug and receptacle.
No adapter should be used with the
required plug. If the plug does not fit the
available receptacle, or the machine must
be reconnected for use on a different type
of circuit, the reconnection must be made
by a qualified electrician and comply with all
local codes and ordinances.
-10-
extension cords
minimum gauge size ...........................14 aWg
maximum length (shorter is better).......50 ft.
Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+)