Connecting The Cables - HP Pavilion IPS User Manual

Connecting the Cables

1.
Place the monitor in a convenient, well-ventilated location near the computer.
2. Connect a signal cable.
NOTE:
determined by the video cable used. The monitor will automatically determine which inputs have
valid video signals. The inputs can be selected by pressing the
or through the On-Screen Display (OSD) feature by pressing the
For analog operation, use a VGA signal cable. Connect the VGA signal cable to the VGA
●
connector on the rear of the monitor and the other end to the VGA connector on the
computer.
Figure 2-4
6 Chapter 2 Setting Up the Monitor
The monitor is capable of supporting analog, digital, or HDMI input. The video mode is
Connecting a VGA Signal Cable (provided with select models)
+/source button on the front panel
Menu button.