[Ptz Control] - JVC VN-H657U Instructions Manual

Pan / Tilt / Zoom
Pan / Tilt operation:
0
Click the arrow buttons to move the display area
in the direction indicated by the arrow. Release
the button to stop the movement.
Click the [H] button to move to the home
position.
Zoom operation:
0
Use this function to perform zoom operation on
the display area.
[+]: Zooms in and enlarges an object.
[-]: Zooms out and reduces an object.
Scale display:
0
Displays the current magnification.
Memo :
You can restrict the magnification of the object
0
using the [+] button by altering the [EZoom
Limit] settings.
(A P43 [ EZoom Limit ] )
You can operate the Pan, Tilt and Zoom function
0
using a mouse. If you click the mouse on the
screen, the clicked spot will be the center of the
display area.
Speed
Sets an operation speed.
9 Pan / Tilt
Controls the speed of [Pan / Tilt] operation. A
0
larger value increases the operation speed.
[Set values: 1 to 8]
9 Zoom
Controls the speed of [Zoom] operation. A larger
0
value increases the operation speed.
[Set values: 1 to 4]

[PTZ Control]

Controls the PTZ function. Operate the camera to
adjust the direction, angle and focus.
This page can be used during access using
"admin" or "operator".
While another menu is open, click [Control] to
0
switch to the Control Menu. Click [PTZ Control]
to open the Settings screen.
.
[Control] - [PTZ Settings]
59