GE RHM 20 Specifications

GE
Measurement & Control
RHM 20
Medium Sized Coriolis
Mass Flowmeter
The RHM 20 can measure flow rates up to 300 kg/
min (661 lb/min) with temperatures in excess of
350°C and pressures up to 392 bar. This model is
medium sized with true reliability for a versatile
solution, manufactured by GE's Rheonik mass
flowmeter experts.
Applications
• General control • Dosing
• Batching • Injections
Features
• Suitable for pressure up to 392 bar
• Flow uncertainty down to 0.15%
• Density uncertainty down to 0.5%
• Repeatability better than 0.05%
• Unique torsion oscillator
• Typical measuring ranges from 3 to 300 kg/min
• Minimal flows as low as 2.25 kg/min
• Optimized solutions for batching operation
• Customization possible
• Hazardous Area Approvals (ATEX, CSA, ...)
g
• Mixing
• Filling
Advantages
• Torsion oscillator design assures most stable and
basically drift free measurement and increased
signal to noise ratio
• Not sensitive to changes in pressure
• Longest life time and increased safety (low stress
in welds and increased wall thickness against
abrasion)
• No moving parts, practically no maintenance
• Removable connection manifold available