Hitachi G 18SE3 Handling Instructions Manual
Hide thumbs
Also See for G 18SE3:
- Handling instructions manual (69 pages) ,
- Technical data and service manual (55 pages) ,
- Handling instructions manual (16 pages)
Table of Contents
Advertisement
Quick Links
Disc Grinder
Model G 18SE3 • G 18SG2 • G 23SF2
G 23U2 • G 23SE2 • G 23UB2
Handling instructions
NOTE:
Before using this Electric Power Tool, carefully read through these
HANDLING INSTRUCTIONS to ensure efficient, safe operation. It
is recommended that these INSTRUCTIONS be kept readily
available as an important reference when using this power tool.
G23SE2
Advertisement
Table of Contents
Related Manuals for Hitachi G 18SE3
Summary of Contents for Hitachi G 18SE3
-
Page 1: Handling Instructions
Disc Grinder Model G 18SE3 • G 18SG2 • G 23SF2 G 23U2 • G 23SE2 • G 23UB2 Handling instructions G23SE2 NOTE: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these INSTRUCTIONS be kept readily available as an important reference when using this power tool. -
Page 2: General Operational Precautions
17. Avoid unintentional starting. Do not carry a plugged- GENERAL OPERATIONAL PRECAUTIONS in tool with a finger on the switch. Ensure switch is off when plugging in. WARNING! When using electric tools, basic safety 18. Use outdoor extension leads. When tool is used precautions should always be followed to reduce the outdoors, use only extension cords intended for risk of fire, electric shock and personal injury, including... -
Page 3: Specifications
SPECIFICATIONS Model G18SE3 G18SG2 G23SF2 G23U2 G23SE2 G23UB2 Voltage (by areas)* (110V, 220V, 230V, 240V) Input* 2300 W 2500 W 2000 W 2400 W, 2500 W No-load speed 8500 min 6600 min Outer dia. 180 mm 230 mm Wheel Inner dia. 22 mm Peripheral speed 80 m/s... - Page 4 5. Ensure that the depressed center wheel to be utilized pushing the locking button forward is the correct type and free of cracks or surface defects. once again. Also ensure that the depressed center wheel is (*Subject to change depending on properly mounted and the wheel nut is securely area.) tightened, refer to the section on “Depressed Center...
-
Page 5: Maintenance And Inspection
ONLY be performed by a Hitachi Accordingly, some parts (i.e. code numbers and/or Authorized Service Center. design) may be changed without prior notice. - Page 12 Hitachi Koki Co., Ltd. Code No. C99122514 Printed in Malaysia...