Using The Face Self-Timer - Canon IXUS 870 IS User Manual

" Using the Face Self-Timer

Once you compose the shot, such as for a group photo, and press the
shutter button, the camera will take three shots in a row two seconds after it
detects your face
What if a face is not detected?
Even if your face is not detected after joining the subjects, the shutter will release
approximately 30 seconds later.
Changing the number of shots
For the screen in Step 1, press the n button and select [FaceSelf-Timer] in the
[Drive Settings] screen, then press the qr button to change the number of shots.
62
(p. 78) when you enter the scene.
Select ".
●
Compose the scene and press the
shutter button halfway.
●
Press the shutter button fully.
Join the subjects and look at the camera.
●
Follow Step 2 on
Make sure a green frame appears on the
face of the main subject, and white frames
appear on other faces.
The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
The lamp blinks and the self-timer sound
plays.
When the camera detects a new face, the
lamp and sound speed up (the lamp
remains lit when the flash will fire), and
two seconds later the shutter releases.
The second and third shots will continue
to be taken.
To return to the original setting, select
in Step 2 on p. 61.
and select ".
p. 61