Installation - Electrolux EHK12 User Manual

16 electrolux
Problem
The cooking zones do not op-
erate
The oven does not heat up
The oven does not heat up
The oven lamp does not oper-
ate
Steam and condensation settle
on the food and in the oven
cavity
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

Warning! Refer to "Safety information"
chapter.
The handle can be replaced to match
the décor of your kitchen. The change
must be done by an authorized person.
Use only genuine replacement parts.
INSTALLING THE OVEN UNDER A
WORK SURFACE
Warning! Installation into flammable
material must agree with NIN 2005,
chapter 4.2.2 of the VKF (Association
of Cantonal Fire Insurers) fire protection
guidelines and regulations.
Possible cause
Consult the operating instructions for the built-in cooking surface
The oven is not switched on
The fuse in the fuse box is re-
leased
The oven lamp is defective
You left the dish in the oven for
too long
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity.
1. Install the hotplates according to the in-
Switch on the oven (refer to
chapter "Daily use")
Control the fuse. If the fuse is
released more than one time,
refer to a qualified electrician.
Replace the oven lamp
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
.........................................
.........................................
.........................................
stallation instruction no.374307900/
374307901 so that the hotplate socket
connections can be carried out before
the cooker is inserted. Make sure the
correct socket connections are
used.
A separate earthing is not required.
A = appliance
Remedy