Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for AEG L 76285 FL
Summary of Contents for AEG L 76285 FL
- Page 1 EN User manual L 76285 FL L 76482 FL...
-
Page 2: Table Of Contents
13. ENVIRONMENT CONCERNS ..........31 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler –... -
Page 3: Safety Information
ENGLISH 1. SAFETY INFORMATION Before the installation and use of the appliance, careful- ly read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use cau- ses injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS • Connect the mains plug to the mains socket only at the end of the installa- 2.1 Installation tion. Make sure that there is access to the mains plug after the installation. • Remove all the packaging and the transit bolts. -
Page 5: Technical Data
8 bar (0,8 MPa) Cold water Water supply Maximum load Cotton 8 kg Spin speed Maximum 1200 rpm (L 76285 FL) 1400 rpm (L 76482 FL ) 1) Connect the water inlet hose to a water tap with a 3/4'' thread. -
Page 6: Product Description
4. PRODUCT DESCRIPTION Worktop Water drain hose Detergent dispenser Water inlet valve Control panel Mains cable Door handle Transit bolts Rating plate Feet for the appliance level Drain pump 4.1 Accessories Feet for the appliance level Spanner To remove the transit bolts. -
Page 7: Control Panel
ENGLISH 5. CONTROL PANEL Βαμβακερά + Πρόπλυση Βαµβακερά Αθόρυβο Super Eco Συνθετικά 20 λεπτά - 3 κιλά Εύκολο Σιδέρωμα Τζήν Ευαίσθητα Μάλλινα/ Ξέβγαλμα Μεταξωτά Στύψιμο/ Κουβέρτα ´Aδειασμα On/Off button (On/Off) The AUTO Stand-by function automati- cally deactivates the appliance to de- Programme knob crease the energy consumption when: Display... -
Page 8: Delay Start Button
• The display symbols. Symbols Description Washing phase Rinse phases Spin phase Child lock You cannot open the appliance door when the symbol is You can open the door only when the symbol goes off. If the programme is completed but the symbol stays on: •... -
Page 9: Extra Rinse Button
ENGLISH • You activate the appliance. 5.7 Extra rinse button • You deactivate the appliance. Press button to add rinsing phases to • You press the buttons. a programme. • The programme is completed. Use this function for persons allergic to •... -
Page 10: Programmes
10 www.aeg.com 6. PROGRAMMES Programme Type of load Cycle Functions Temperature max. weight of load description Βαμβακερά White and coloured Wash SPIN REDUC- 95° - Cold cotton with normal Rinses TION soil. Long spin NO SPIN max. 8 kg RINSE HOLD ΛΕΚΈΔ... - Page 11 ENGLISH Programme Type of load Cycle Functions Temperature max. weight of load description Μάλλινα/ Machine washable Wash SPIN REDUC- wool. Hand washable Rinses TION Μεταξωτά wool and delicate Short spin NO SPIN fabrics with «hand RINSE HOLD washing» care sym- 40°...
-
Page 12: Consumption Values
12 www.aeg.com 3) The default phase of the spin speed is related to cotton items. Set the spin speed. Make sure that it agrees with the laundry. 4) Set this programme to decrease the time and the consumption of energy and water. -
Page 13: Before First Use
ENGLISH Programmes Load Energy Water Approxi- Remain- Remain- (kg) consump- con- mate tion sump- pro- mois- mois- (kWh) tion (li- gramme ture ture tre) duration (mi- L 76285 L 76482 nutes) Cottons 60 °C 1.60 Cottons 40 °C 1.00 Synthetics 40 0.60 °C Delicates 40... - Page 14 14 www.aeg.com Put the laundry in the drum, one Press button to activate the ap- item at a time. Shake the items be- pliance. fore you put them in the appliance. Put the laundry in the appliance. Make sure not to put too much laun- Use the correct quantity of deter- dry in the drum.
-
Page 15: Check The Position Of The Flap
ENGLISH The compartment for the stain remover. Put the product in the compartment and set the stain function before you start the programme. Flap for powder or liquid detergent Turn it (up or down) in the correct position to use powder or liq- uid detergent. -
Page 16: Open The Door
16 www.aeg.com Measure out the detergent and the fabric conditioner. Carefully close the detergent dis- penser. Make sure that the flap does not cause a blockage when you close the drawer. 8.3 Setting and starting a Press button again to activate the appliance. -
Page 17: Hints And Tips
ENGLISH To open the appliance door: When you activate the appliance again, the display show the end Press button . The door lock of the last set programme. Turn symbol in the display goes off. the programme knob to set a Open the appliance door. -
Page 18: Care And Cleaning
18 www.aeg.com • Wash with a special detergent heavy • Obey the instructions that you find on soil stains. the on packaging of these products. • Be careful with the curtains. Remove • Use the correct products for the type... -
Page 19: External Cleaning
ENGLISH 10.1 Descaling the drum. Make regularly a maintenance wash. To do this: The water we use contains limescale. If it • Empty the laundry from the drum. becomes necessary, use a water softener • Set the hottest cotton wash pro- to remove limescales. -
Page 20: Drain Pump
20 www.aeg.com Remove the top part of the liquid additive compartment. Clean all the parts with water. Clean the dispenser recess with a brush. Put back the dispenser in the recess. • The display shows an alarm code be- 10.7 Drain pump cause of the problem with water drain. - Page 21 ENGLISH Put a container below the recess of the drain pump to collect the water that flows out. Press the two levers and pull for- ward the drainage duct to let the water flow out. When the container is full of water, put the drainage duct back again and empty the container.
-
Page 22: Emergency Drain
22 www.aeg.com To clean the water inlet filters: Close the water tap. Remove the water inlet hose from the water tap. Clean the filter in the inlet hose with a stiff brush. Remove the inlet hose behind the appliance. Clean the filter in the valve with a stiff brush or a towel. -
Page 23: Troubleshooting
ENGLISH 11. TROUBLESHOOTING The start of the appliance does not oc- • - The appliance does not drain cur or it stops during operation. the water. First try to find a solution to the problem • - The appliance door is open or (refer to the table). - Page 24 24 www.aeg.com Problem Possible cause Possible solution The anti-flood de- • Disconnect the appliance. vice is on. • Close the water tap. • Contact the service centre. The spin phase The spin phase is off. Set the spin programme. does not operate.
-
Page 25: Installation
ENGLISH Problem Possible cause Possible solution The appliance fills The end of the drain Make sure that the drain hose is with water and hose is too low. in the correct position. drain immediately. The washing re- The detergent you used Increase the detergent quantity sults are not satis- was not sufficient or cor-... - Page 26 26 www.aeg.com Remove the cardboard top. Remove the polystyrene packaging materials. Remove the internal film. Open the door. Remove the poly- styrene piece from the door seal and all the items from the drum. Put one of the polystyrene packag- ing elements on the floor behind the appliance.
- Page 27 ENGLISH Remove the polystyrene protection from the bottom. Pull up the appliance in vertical po- sition. Remove the power supply cable and the drain hose from the hose hold- ers. Remove the three bolts. Use the key supplied with the appliance. Pull out the plastic spacers.
-
Page 28: Positioning And Levelling
28 www.aeg.com WARNING! We recommend that you keep Remove all the packaging and the packaging and the transit the transit bolts before you install bolts for when you move the ap- the appliance. pliance. 12.3 Positioning and levelling • Install the appliance on a flat hard floor. -
Page 29: Water Drainage
ENGLISH • Connect the water inlet hose to the cold water tap with 3/4 thread. CAUTION! Make sure that there are no leaks from the couplings. Do not use an extension hose if the inlet hose is too short. Con- tact the service centre for the re- placement of the inlet hose. - Page 30 30 www.aeg.com • On the edge of a sink. • Make sure that the plastic guide can- not move when the appliance drains. Attach the guide to the water tap or the wall. • To a stand pipe with vent-hole.
-
Page 31: Environment Concerns
ENGLISH 13. ENVIRONMENT CONCERNS Recycle the materials with the appliances. Do not dispose symbol . Put the packaging in appliances marked with the symbol applicable containers to recycle it. with the household waste. Return the Help protect the environment and product to your local recycling human health and to recycle waste facility or contact your municipal... - Page 32 www.aeg.com/shop...