Table of Contents
Advertisement
Modify Profile:
Modifying profiles allows you to edit specific portions of existing profiles without the need for
recreating them entirely. This may be used if a wireless network's encryption key has changed, or if
IP addressing has changed.
To modify a profile, use the remote control's navigation keys to go through the wizard. Once
modifying a profile, the wizard is identical to the wizard used to create a network. If you need further
assistance, follow the instructions available under the 'Create New Profile'.
Connect to Profile:
Connecting to a profile just instructs the LinkTheater to connect to a specific, existing network profile.
If you wish to connect to a different profile than the one you are currently connected to, then select
the profile using the remote's navigational arrows and press the right arrow.
Once connected to the new profile, you will remain on the network until you connect to another profile,
add a new profile, or restart the LinkTheater. If you wish to make a network profile the preferred or
default profile, then please see the 'Profile Startup Order' section of this guide.
33
Advertisement
Table of Contents
