Cisco VT II User Manual page 8

1
Cisco VT Camera II
2 USB cable and connector
3
Privacy shade (attaches to the
camera)
Procedure
1. Remove the camera, privacy shade, and the flexible camera base from
the packaging.
2. Mount the camera on the flexible camera base:
a. Insert the protruding black plastic tab on the camera base into the
opening on the bottom of the camera.
b. Snap the camera into place.
The camera will then be firmly connected to the flexible camera base.
3. Attach the privacy shade to the camera.
4. Position the camera on top of your PC monitor or flat panel screen,
adjusting the flexible camera base as necessary. See
6
4
Flexible camera base
5 Opening on the bottom of the
camera
6
Tab on the flexible camera base
(snaps into the opening on the
bottom of the camera)
Figure 2.
78-16026-04