Advertisement
Inserting the Shelf and Sheet
The shelf has two guide rods on the
right and left. These must always
point down.
Inserting the Shelf
Insert the shelf so that the two guide rods face down. Insert the shelf
on the oven shelf runner rails so that the two holes engage in the re-
taining bolts of the oven shelf runner rails.
Inserting the baking / universal
sheet
Insert the sheets so that the anti-tip
fixture faces to the rear. Insert the
sheets on the oven shelf runner rails
so that the two holes engage in the
front retaining bolts of the oven
shelf runner rails.
Inserting the shelf and sheet
When using the shelf and universal
sheet together, place the shelf ex-
actly in the recesses of the sheet.
3
To simplify placement of the insert
part if the rails have been pulled out
differently, place the insert part on
the rails at the back, push it in as far as it will go and then lower it into
the retaining bolts at the front.
4
Advertisement
