Table of Contents
Advertisement
13.8 Oven injector replacement
B
A
C
F
Minimum level adjustment of the oven
burner:
1.
Remove the knob for the oven func-
tions.
2.
Adjust the by-pass adjustment screw
(A) with a thin-bladed screwdriver.
1.
2.
3.
D
4.
E
5.
6.
Remove the bottom plate of the oven
cavity (A) to get access to the oven
burner (B).
Release the screw (C) which keeps
the burner in position.
Carefully move the burner off the in-
jector support (D).
Slowly move it to the left side. Make
sure that the burner bush stays on
the burner mouthpiece. Do not apply
force to the wire of the spark plug
connector (E) and to the thermocou-
ple conductor (F).
Release the burner injector (D) with a
7 mm socket spanner and remove it.
Replace it with the necessary one.
Assemble the burner in the opposite
sequence.
Replace the gas type sticker near the
gas supply ramp with the one related
to the new gas type.
ENGLISH
23
Advertisement
Table of Contents
