Turning Off The Memory Rx Mode - Epson Aculaser CX16NF User Manual

5. Use the keypad to type in the time when memory reception mode begins, and then press the Select
key.
The ending time input box appears.
Note:
To specify no start time, press the Select key without specifying a time. The password input box
appears. Continue with step 7.
6. Use the keypad to type in the time when memory reception mode ends, and then press the Select
key.
The password input box appears.
7. Enter the password, and then press the Select key.
Memory reception mode is set.
Note:
❏ The password is required for turning off memory reception mode or changing the start/end times.
Enter a 4-digit number.
❏ To specify no password, press the Select key without specifying a password.

Turning Off the Memory RX Mode

1. Press the u or d key to select UTILITY, and then press the Select key.
Note:
For details on selecting a menu, refer to "General Procedure for Specifying Settings in Utility Menu"
on page 13.
2. Press the u or d key to select FAX RX OPERATION, and then press the Select key.
3. Check that MEMORY RX MODE is selected, and then press the Select key.
4. Using the u or d keys, select OFF, and then press the Select key.
The password input box appears.
AcuLaser CX16NF Facsimile User's Guide
Control Panel and Configuration Menu 15