Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha Fazer FZ1-S Owner's Manual

Replacing the tail/brake light
bulb
1. Remove the passenger seat. (See
page 3-19.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1. Tail/brake light bulb socket
3. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the passenger seat.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU24114
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
EAU24204
Replacing the license plate
light bulb
1. Remove the license plate light unit
1. License plate light unit
2. Screw
2. Remove the socket (together with
[ECA11191]
1. License plate light bulb
6-34
by removing the screws.
the bulb) by pulling it out.
EAU24312
6