To Select A Tone - Casio XW-G1 User Manual

Built-in sound
source
External device

To select a tone

1. 7
Press TONE.
The button will light and the Synthesizer will enter the Tone Mode.
2. bq
Press PRESET/USER to select preset tones or user tones.
• Preset tones are selected while the button is unlit, while user tones are selected while the button is lit.
bq
3.
Use the number buttons (0 to 9) to input a tone number.
• You also can select a tone number by rotating the
• One more way to change the tone number is to use the
displayed number. Pressing the
selected category (see next section).
■ Tone Category Overview
Category
Number
Preset User
P000-P099 U000-U099
P100-P399 U100-U199 PCM Melody Tone The tones in this category let you use sampled
P400-P419 U300-U309
– U200-U210
• See the separate "Appendix" for a complete list of tones.
Zone Part 1 Zone Part 2
Zone 1 Zone 2
settings settings
(MIDI (MIDI
Channel 1) Channel 2)
br
minus (–) and plus (+) buttons at the same time will jump to the first tone in the current
Name
This category contains traditional analog synthesizer
tones. You can select a waveform as a base, and
Solo Synthesizer then edit the three elements of a sound (pitch, tone,
volume) to create exactly the sound you want.
Monophonic.
sounds to reproduce the sounds from a variety of
PCM Drum Tone
different instruments.
Edits the wave of a sound recorded with the sample
looper (page E-64). The wave of a sound can be
User Wave Tone edited and saved as a user wave tone.
• User wave tone U210 is a tone that is changed in
real-time by sample looper recording.
Zone Part 3
Zone 3
settings
(MIDI
Channel 3)
bp
dial.
br
minus (–) and plus (+) buttons to decrease or increase the
Description
Selecting and Creating Tones
Zone Part 4
Zone 4
settings
(MIDI
Channel 4)
Number of Tones
Preset
100
300
20
–
User
100
100
10
11
E-19