Prior To Initial Start-Up; Starting Up - Setting The Temperature - AEG ÖKO SANTO SANTO Operating Instructions Manual

Prior to Initial Start–Up
1. Please clean the appliance interior and all accessories prior to initial
0
start-up (see section: "Cleaning and Maintenance").

Starting Up - Setting the Temperature

The temperature regulator is in the
refrigerator compartment on the
upper right. It is also the ON/OFF-
switch.
Position "0" = Refrigeration off
Position "1" = Warmest interior temperature
Position "6" = Coldest interior temperature
0 1. Plug the mains plug into the mains socket.
2. Set the required temperature by turning the temperature regulator.
The compressor starts and then runs automatically. The interior lighting
comes on.
3. If you want a higher or lower temperature, turn the temperature regu-
lator to a warmer or cooler setting respectively.
Note: When the setting is changed, the compressor does not start
immediately if automatic defrosting is currently taking place.
Goods to be refrigerated can be loaded immediately after switching on,
3
because the storage temperature in the refrigerator is quickly reached.
Important! Wait until the freezer compartment has reached a tempera-
ture of –18 °C, before storing frozen food.
Note: From a food science point of view, +5 °C for the refrigerator
3
compartment and -18 °C for the freezer compartment should be con-
sidered cold enough as a storage temperature.
The following effects are of significance in respect of the interior tem-
perature:
– Ambient temperature;
– Quantity and temperature of the food stored;
– Frequency with which the door is opened and how long it is left
open
– A defect in the appliance.
38