Advertisement
12. For in-dash CD changer installation: While wearing
gloves, lift up and remove the shipping cover and
label. Remove one adhesive strip, and attach it to
the bottom edge of the changer. Discard the shipping
cover, the label, and the other adhesive strip.
SHIPPING
LABEL
IN-DASH
CD CHANGER
13. Place the radio onto the CD/cassette player or in-
dash CD changer.
CENTER
WASHER-
PANEL
BOLTS
(reused)
14. Slide the radio assembly into the center panel. Install
the four washer-bolts you removed from the radio in
step 10, and four of the washer-screws provided with
the CD/cassette player or in-dash CD changer.
4 of 5
SHIPPING
BRACKET
ADHESIVE
STRIP
RADIO
CD/CASSETTE
PLAYER or
IN-DASH CD
CHANGER
WASHER-SCREWS
(provided with CD/cassette
player or in-dash CD
changer)
15. Install the clip to the CD/cassette player or in-dash
CD changer with one washer-bolt, and plug the
connector into the back of the radio.
CD/Cassette Player: The CD player may use a
4 x 6 mm washer-bolt to attach the clip.
RADIO
CD/CASSETTE PLAYER
In-Dash CD Changer: Use the 4 x 8 mm washer-
bolt.
4 x 8 mm
WASHER-BOLT
17. Fold the excess length of the cable, and secure it
with the clip.
AII 20434 (9908)
CD/CASSETTE
PLAYER CONNECTOR
CLIP
WASHER-BOLT
IN-DASH
CD CHANGER
CLIP
© 1999 American Honda Motor Co., Inc. - All Rights Reserved.
Advertisement
