Table of Contents
Advertisement
RX3042H User's Manual
5 Router Setup
This chapter describes how to configure the basic settings for your
router so that the computers on your LAN can communicate with
each other and have access to the Internet. Network setup consists
of LAN and WAN configurations.
5.1
LAN Configuration
5.1.1 LAN IP Address
If you are using RX3042H with multiple PCs on your LAN, you
must connect your LAN to the Ethernet ports on the built-in
Ethernet switch. You must assign a unique IP address to each
device residing on your LAN. The LAN IP address that identifies
the RX3042H as a node on your network must be in the same
subnet as the PCs on your LAN. The default LAN IP address for the
RX3042H is 192.168.1.1.
Definition: A network node can be thought of as any
interface where a device connects to the network,
such as the RX3042Hʼs LAN port and the network
interface cards on your PCs. See Appendix 11 for an
explanation of subnets.
You can change the default IP address to reflect the true IP address
that you want to use with your network.
5.1.2 LAN Configuration Parameters
Table 5.1 describes the configuration parameters available for LAN
IP configuration.
Router Setup
27
Advertisement
Table of Contents
