Advertisement
5
Connect the electronic dictionary to your computer.
• Be sure to use the USB cable that comes with the electronic dictionary.
Important!
Make sure that EX-word TextLoader is installed on your computer
before connecting your electronic dictionary.
1 Make sure that EX-word TextLoader is running on the computer.
2 Turn off the electronic dictionary.
3 Plug one end of the USB cable directly into the USB port of your
computer. Plug the other end into the USB cable connector of the
electronic dictionary.
Be sure to plug the cable directly into the computer's USB port.
Proper operation may not be possible with an indirect connection (via
a USB hub, etc.).
6
Establish a connection between the electronic dictionary and
computer.
1 Turn on the electronic dictionary.
2 Press
3 On the electronic dictionary, press
press
• If a "Note" message appears, use the electronic dictionary's
keys to select the option you want and then press
press
and then press
.
again.
to display the "Library" screen.
to highlight "PC Link" and then
6
and
. Next,
Advertisement
