Resetting Account - Sharp AR-5516 Operation Manual

Resetting account

(program No.15)
The copy count of a single account or all accounts can
be reset to 0. If no account numbers have been
established, the error code "15E" will appear in the
display.
[Resetting all accounts]
Press the [1] key and then press the [START]
key ( ).
The copy counts of all accounts will be deleted.
[Resetting a single account]
1 Press the [0] key, and then press the
[START] key ( ).
2 Select the account number to be reset with
the [Copy ratio display] key (
then press the [START] key (
To reset another account number, enter the
Note
program number (15) for account number
deletion and then repeat the procedure for
"Resetting a single account".
Copying when "Auditing mode" is
enabled
When "Auditing mode" is enabled, "- - -" appears in the
display.
1
Enter your 3-digit account number
with the numeric keys.
When you enter your account number, "0"
) and
appears in the display to indicate that copying is
).
possible.
Note
2
Follow the appropriate steps to make
the copy.
Note
3
When finished, press the [
(
Note
If you enter an incorrect number, press the
[CLEAR] key ( ) and then enter the correct
number.
If you are performing an interrupt copy (p.28),
be sure to press the [INTERRUPT] key (
when finished to exit interrupt mode.
).
ACC.#-C
If a misfeed occurs or the paper runs out
during copying, your session will not end even
if the [ ] key (
ACC.#-C
USER SETTINGS
)
5
] key
) is pressed.
63