Broker Call; Save And Repeat; Speed Dial - NEC Dterm Series i User Manual

Hide thumbs Also See for Dterm Series i:

To park a call: Ask caller to hold; press Transfer, then dial *0. Caller is placed on hold.

To retrieve a parked call from a remote telephone: Lift handset; Dial #0, plus the extension number where the

call was parked. You are connected with the caller.

To retrieve a parked call from original telephone: Lift handset; Dial Call Park code *0. You are connected with the

caller.

BROKER CALL

To consult with a third party while you are engaged on a call: Press Transfer to place first party on hold. Dial

second party; converse when they answer. To return to first party, press Transfer; second party is automatically

placed on hold. To continue to alternate between calls, press Transfer again.

REDIAL

To redial number you last dialed: Press Redial. Last number dialed is displayed (you may press Redial continuously

until desired number is displayed). Press * to dial.

Requires a preprogrammed function button. Stores a number for future one-time redial.

To save a number: After dialing desired number, press S&R function button. Number is stored. May also be used to

store the number of an incoming on-campus extension call.

To verify: Do not lift handset; press S&R button. Display indicates digits stored. To redial: Press S&R function

button.

To store numbers for speed dialing: Do not lift handset. Press Feature button. Press Speed Dial button to be

programmed. Dial telephone number or system feature code to be stored (24 digits maximum). Press Feature

button again. Display indicates SPD SET.

To verify: Press Feature button and desired speed dial button. Display indicated digits stored.

To program "Transfer" on one-t0uch speed key: Do not lift handset. Press Feature button. Press desired Speed

Dial button to be programmed. Press "Recall" button. (Do not press "Transfer" button.) Dial extension number to be

programmed. Press Feature button again. Display indicated SPD SET. Note: This speed button can also be used to

call the party directly.

Note: Features such as Call Transfer, Call Forwarding, and Call Park can be programmed into the speed dial button.

Use the "Recall" button if storing the Transfer feature, or as a Pause function when saving a string of numbers.

RECALL

To place another call, or activate a feature, without hanging up: When finished with first call, allow

other party to hang up. Press RECALL button to hear new dial tone.

Table of Contents