Using The Supplied Speaker Stands - Pioneer LX03BD Operating Instructions Manual

02 Speaker Setup Guide (LX03BD)
Front surround setup:
Left
Blue
Green
Surround
speaker
Center
speaker
Caution
• Do not attempt to carry the speakers when
they are connected with the bracket. Doing
so may cause damage to the bracket or
worsen damage to the bracket and
speakers in the event they are dropped.
3 Connect the speaker system.
Refer to Connecting up on page 26 to connect
the speakers properly. After connecting
everything, place the speakers as shown in the
diagram above for optimal surround sound.
After placing the speakers, run the Auto
MCACC setup (page 29) to complete your
surround sound setup.
18
En
Right
Surround
Grey
speaker
Center
Green
speaker
Bracket
Screw

Using the supplied speaker stands

When setting up the front surround, the
supplied accessory speaker stand can be used.
Apply the non-skid pads (for speaker stand) to
the four corners of the speaker stand and set
the speakers on the stand.
Non-skid pads
(for speaker stands)
Speaker stand