Handlebar Switches - Yamaha XCITY VP250 Owner's Manual

Hide thumbs Also See for XCITY VP250:

Owner's manual (82 pages)

Owner's manual (80 pages)

Table Of Contents

Table of Contents

Oil change indicator "OIL"

ZAUM0582

1. Oil change indicator "OIL"

The engine oil should be changed

when this indicator comes on. The indi-

cator stays on until it is reset. After

changing the engine oil, reset the indi-

cator as follows.

1. While holding the "MODE" and

"SET" buttons pushed, turn the key

to "

2. Continue holding the "MODE" and

"SET" buttons pushed for two to

five seconds.

3. Release the buttons and the oil

change indicator will go off.

INSTRUMENT AND CONTROL FUNCTIONS

NOTE:

The oil change indicator will come

on at the initial 1000 km (600 mi)

and every 3000 km (4800 mi)

thereafter.

If the engine oil is changed before

the oil change indicator comes on

(i.e. before the periodic oil change

interval has been reached), the in-

dicator must be reset after the oil

change for the next periodic oil

change to be indicated at the cor-

rect time. After resetting, the indi-

cator will come on for two seconds.

If the indicator does not come on,

repeat the procedure.

3-6