Engb; Ejecting An Sd Memory Card; F920Bt, Avic-F9210Bt, And Avic-F9220Bt; Plugging And Unplugging A Usb Storage Device - Pioneer AVIC-F20BT Operation Manual

Basic operation

Ejecting an SD memory card

(for AVIC-F920BT, AVIC-F9210BT
and AVIC-F9220BT)
p This section describes operations for AVIC-

F920BT, AVIC-F9210BT, and AVIC-F9220BT.

1 Press the h button.
The touch panel keys for ejecting the media
appear.
2 Touch [Eject SD].
A message prompting you to remove the SD
memory card appears.
3 Press the middle of the SD memory
card gently until it clicks.
4 Pull the SD memory card out straight.
When the data related to map data is
stored
If data related to map data, such as custo-
mised POI data, is stored on the SD memory
card, operating procedures are slightly differ-
ent.
1 Press the h button and then touch
[Eject SD].
2 Touch [Yes].
The navigation system restarts, and a message
prompting you to remove the SD memory card
appears.
3 Eject the SD memory card while the
message is displayed.
Eject the SD memory card before touching
[OK].
4 Touch [OK].
The navigation system restarts.
Plugging and unplugging a
USB storage device
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
Chapter
02
17

Engb