Filtering The Ldap List - Fujitsu iScanner fi-6010N Operator's Manual

■ Filtering the LDAP List

This section describes how to filter the LDAP List on the "LDAP List" window.
1. In the [User Name] drop-down list box, select the display format for the user names
shown on the user name/e-mail address list.
2. Enter the LDAP server and character string to be used for LDAP searches in the
"Search Base" field.
The LDAP entries under the character string entered here will become the search target.
This may be up to 520 characters long.
3. In the [Search Position] drop-down list box, select the filtering method.
The default setting is [Head (abc...)].
Search
Position
Head Filtered by words that start
(abc...) with the character string
entered in
Anywhere Filtered by words that include
(...abc...) the character string entered in
Step
Tail Filtered by words that end with
(...abc) the character string entered in
Step
4. Enter the filter character string.
Enter the user name and e-mail address to be filtered, in whole or in part.
Up to 256 characters may be entered for both user names and e-mail addresses.
If both a user name and e-mail address is entered, data containing either of them are searched
as "AND Search".
Description
Step 4.
4.
4.
fi-6010N Network Scanner Operator's Guide
4.11 Setting Job Features
Example
Search Result
Target
abc abc, abc1, abcd, ...
abc abc, abc1, xabc, xabcy, ...
abc abc, 1abc, xabc, ...
4
199