HP Compaq 4000 Pro series Quickspecs page 36

QuickSpecs
Technical Specifications - Solid State Drives
Latency
Power
Useful Drive Life
Environmental
(all conditions, non-condensing)
NOTE:
For solid state disk drives, GB means 1 billion bytes. 16GB is the unformatted capacity of this drive before a portion of the drive is
reserved for flash management features. Actual capacity varies by content and will be less than 15.8GB.
HP 160-GB Solid State Drive
Unformatted Capacity
Architecture
Interface
Dimensions (W x H x D)
Weight
Bandwidth Performance
Latency
Power
Useful Drive Life
Environmental
(all conditions, non-condensing)
NOTE:
For solid state disk drives, GB means 1 billion bytes. 16GB is the unformatted capacity of this drive before a portion of the drive is
reserved for flash management features. Actual capacity varies by content and will be less than 15.8GB.
Read:
Write:
DC power requirement:
Total power consumption:
Operating Temperature:
Relative Humidity:
Maximum Wet Bulb
Temperature (operating):
Shock:
160 GB
Multi Level Cell (MLC) NAND Flash with wear leveling 10 channel controller
Serial ATA 2.0 (3.0 Gb/s)
2.74 x 0.37 x 4 in (6.98 x 0.95 x 10.2 cm)
0.18 lb (80 g)
Sustained Sequential
Read:
Sustained Sequential
Write:
Random Read: Up to 35K IOPs
Random Write: Up to 6.6K IOPs
Read: 65-ms
Write: 85-ms
DC power requirement: 5 VDC 5%-100 mV ripple p-p
Total power consumption: 0.15W (active); 0.075W (idle)
35TB written, up to 20GB/day for 5 years
Operating Temperature: 32° to 158° F (0° to 70° C)
Relative Humidity: 5% to 95%
Maximum Wet Bulb
Temperature (operating):
Shock: 1,500 G/0.5-ms
DA - 13860 North America — Version 14 — August 14, 2013
Up to 250 MB/s
Up to 70 MB/s
84° F (29° C)
HP Compaq 4000 Pro Series
Page 36