Advertisement
QuickSpecs
Standard Features
Warranty
Cache parity/ECC protects cache data from accidental data corruption.
Machine Check Architecture (MCA) detects and captures hardware errors such as system bus,
memory ECC, parity, and cache, and improves service time.
Intel® QPI Protocol Protection allows detection of data errors using a checksum of 8-bits.
Core Disable for FRB (fault resilient boot) allows a system to power-on despite a failing core-pair. It
uses BIST (built-in self test) results to detect a failure and disables the target core-pair upon
subsequent boot.
Server Blade Enclosure Infrastructure
Pooled power for true N+N power redundancy through up to six (6) hot-plug, high-efficiency,
common slot enclosure-based power supplies (configuration dependent).
Up to ten (10) redundant enclosure-based hot-plug HP Active Cool fans that scale to meet future
demands and optimize airflow, reduce power draw, and improve acoustic performance.
Dual grid power providing redundant rack enclosure power feeds to the server blade enclosure.
HP Dynamic Power Saver Mode the total enclosure power consumption is monitored in real time and
automatically adjusted with changes in demand for improved efficiency and reliability.
HP Dynamic Power Capping safely limits power usage without impacting performance by capping
peak usage instead of average power usage, removes risk to electrical infrastructure with a fast-
acting, hardware-based capping algorithm, and reclaims more power by dynamically controlling
power limits based on workload demand.
Up to eight interconnect modules per server blade enclosure providing four simultaneous redundant
fabrics for FlexFabric, Virtual Connect Ethernet, Fibre Channel, InfiniBand, Pass Thru Ethernet, etc.
Enclosure crosslinks between adjacent enclosures to provide interconnect module-to-module
connections or as Virtual Connect module stacking links.
Optional enclosure redundant Onboard Administrator system management module.
This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three
years from date of purchase. Support for software and initial setup is available for 90 days from date of
purchase. Enhancements to warranty services are available through HP Care Pack services or customized
service agreements. Certain restrictions and exclusions apply. Hard drives have either a one year or three
year warranty; refer to specific hard drive QuickSpecs for details.
NOTE: Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support. Warranty repairs may
be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories:
1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy
replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR
parts at no charge. Additional information regarding worldwide limited warranty and technical support is
available at
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
DA - 14208 North America — Version 31 — December 13, 2013
HP ProLiant BL460c Generation 8 (Gen8) Server Blade
Page 13
Advertisement
