To Batch Save All Of The Pages As Individual Image Files; Saved File Naming Rules; Converting A Dst File To A Ppg File - Casio YA-W72M User Manual

To batch save all of the pages as individual image files

1.
Click to display the Save File menu, and then click
2.
Use the "Save As" dialog box that appears to specify a file name and a storage
location, and then click [Save].
Nine-digit numbers that indicate the time of the file saves and three-digit page numbers will be
appended automatically to the file names. The three-digit serial number will start from 001 for
the first file, and be incremented for each additional file. For more information, see "Saved File
Naming Rules" (page 69).

Saved File Naming Rules

Files you save in the Presentation Mode and Capture & Draw Mode are named using the formats
shown in the table below.
When you perform this type of save operation:
Save as a PPG file or DST file
Save of the currently displayed page as an image file
Batch save of all pages as individual image files
{name you input} ..........This is the name you enter in the "File Name" box on the "Save As" dialog
{save time} ....................Automatically specified time in the format: hhmmssfff
{page number} ..............Three digit number indicating the page of the output source file. Image files

Converting a DST File to a PPG File

You can convert a DST file that was saved in the Capture & Draw Mode to a PPG file (which can be
opened in the Presentation Mode) by changing is filename extension from .dst to .ppg. This makes it
easy to incorporate images of a computer screen captured using the Capture & Draw Mode directly
into a presentation. After you open a converted file in the Presentation Mode, you will be able to edit
objects that were written or drawn on the image with the Pen or Marker Pen tool in the Capture & Draw
Mode.
Important!
Note that while reverse conversion of a PPG file created in the Presentation Mode to a DST file
is theoretically possible by changing the filename extension from .ppg to .dst, the converted
file may not open or display correctly in the Capture & Draw Mode.
box. If you do not enter anything, the name of the currently open file is used as
the default.
hh: Save time hour (24-hour format)
ss: Save time second
are numbered sequentially starting from 001 and continuing up to 200 (the
maximum number of allowable pages).
The file is named using this format:
{name you input}_{save time}
{name you input}_{save time}_{page number}
{name you input}_{save time}_{page number}
mm: Save time minute
fff: Save time millisecond (three digits)
69
.