Advertisement
English-2
Choose storage locations carefully.
●
Do not store the digital pen in any location expose to
-
direct sunlight (such as inside of a motor vehicle), in
locations subjected to high temperatures, in locations
subjected to extremely low temperatures, or in locations
subjected to large amounts of moisture and/or dust.
Any of these conditions can cause deformation and/or
malfunction.
Do not point the lens of the digital pen's built-in camera
●
at the sun.
Pointing the lens of the digital pen's built-in camera at
-
the sun can result in malfunction.
Do not subject the digital pen to strong impact.
●
Dropping the digital pen or otherwise subjecting it to
*
strong impact can result in malfunction of the pen nib or
internal circuitry.
Keep the digital pen and its cap, stylus core (or stylus
●
refill), and ballpoint pen refill out of the reach of small
children.
These items could potentially harm or injure small
*
children. Do not allow small children to handle them.
In particular, the digital pen cap or core could possibly
be swallowed by a small child. Should any pet part
ever be swallowed accidentally, contact a physician
immediately.
Itching, Rash, and Other Skin Irritation Precautions
●
Depending on your particular physical predisposition or
*
condition, use of this product can result in itching, rash,
or other skin irritation. Should you ever experience any
one of these symptoms, immediately stop using the
product and consult your physician.
Be sure to follow all applicable local laws and regulations
●
when disposing of the digital pen.
■
Dot Screen
Warning
Location Precautions
●
Do not use or store the dot screen in any one of the
-
locations described below. Doing so creates the risk of
fire.
•
Near a stove or other heating device
•
In a kitchen or other area exposed to oil smoke
Dot Screen Adhesion Surface Precautions
●
The dot screen that comes with CASIO Interactive
-
Whiteboard is designed for magnetic adhesion to a
metal wall, blackboard, or other appropriate surface.
Do not attempt to attach it to a surface that soiled with
dust or other matter, or to a surface that does not allow
magnetic adhesion.
An improper surface can cause the dot screen to fall,
creating the risk of personal injury.
Secure the dot screen to the surface with the safety hook
●
to prevent falling.
+
To prevent falling of the dot screen if it detaches from
the mounting surface due to impact, be sure to use the
provided safety hook to secure the dot screen to the
surface.
For full details about using the safety hook, see the YA-
W72M/YA-W82M User's Guide.
Caution
Keep the dot screen away from magnetic media.
●
Keep the dot screen away from commuting passes,
-
bank cards, and other magnetic media. Magnetism
from the dot screen can corrupt data on magnetic
media.
Normally, lay the dot screen flat for storage.
●
If you need to store the dot screen so it is standing up
-
on its edge, be sure to take measure to ensure that it
does not fall over. A dot screen leaning against a wall
or otherwise standing on its edge can fall over, creating
the risk of personal injury.
Packing Bag Suffocation Precaution
●
Do not allow the bag that the dot screen comes in to
-
be placed over the head. Doing so creates the risk
of suffocation. Particular care is required in locations
where small children are present.
Inspect the dot screen periodically to prevent accidents.
●
+
Before using the dot screen, check it for looseness,
damage and other problems. Check to make sure the
dot screen is secured with the safety hook.
Do not use the dot screen if it is damaged.
●
If you should ever notice any damage or abnormality,
+
immediately contact your original dealer or authorized
CASIO service center.
Operating Precautions
■
Digital Pen
Passkey when adding a Bluetooth device
●
The passkey of the supplied digital pen is 0000.
Avoid using or storing the digital pen in locations where
●
any of the conditions described below are present or
are prone to occur. Such conditions create the risk of
malfunction of and damage to the digital pen.
•
Electrostatic charge
•
Strong radio waves or magnetism
•
Extremely high or low temperatures
•
High humidity or near a humidifier
•
Sudden temperature changes
•
Large amounts of oil smoke or steam
•
Large amounts dust
•
Water or other moisture (that can get on the digital pen)
•
Corrosive gas
Do not use the digital pen in environments subjected to
●
temperature extremes.
The digital pen is designed for use within the temperatures of
5ºC to 35ºC (41ºF to 95ºF). Use outside of this temperature
range creates the risk of malfunction of and damage to the
digital pen.
Do not use the digital pen in the vicinity of a TV or radio.
●
Doing so can cause noise in the TV image or interference with
radio reception.
Do not allow the digital pen nib to be covered by your
●
fingers.
The digital pen takes snapshots of the paper to find out where
you are writing on the paper. Do not allow your fingers to cover
the nib when writing.
Do not press the switch with your fingers.
●
The digital pen turns off when the cap is in placed on it.
Take care not to press the switch with your fingers when you
hold the pen as shown in the figure. The digital pen will turn off
if the switch is held down for a few seconds.
Be careful not to damage the digital pen nib when
●
replacing the refill.
To clean the digital pen, wipe it with a soft, dry cloth.
●
Any other type of cleaning method creates the risk of
malfunction of or damage to the digital pen.
Use in Other Countries
●
The digital pen has been certified as complying with the
wireless regulations in the country where it is marketed. Be
sure to use the digital pen only in the country where it was
originally marketed. Use of the digital pen in another country
may be illegal.
Dot Screen
■
Dot Screen Handling
●
To use the dot screen, remove the anti-slack wire located
at one end of the screen roll and then unroll the screen.
When putting the dot screen away, roll it up securely onto to
the screen roll and replace the anti-slack wire in its original
position. Next, store the screen in an appropriate location.
When setting up the dot screen, avoid locations where any
●
of the conditions described below are present or are prone
to occur. Such conditions create the risk of malfunction of
and damage to the dot screen.
•
High moisture or direct sunlight
•
Large amounts dust
•
Direct wind
•
Near a stove or other heating device
Note the following precautions to maintain dot screen
●
reflectivity.
•
Do not subject the dot screen to bending or rough treatment.
•
Do not lean against the dot screen.
•
Long term use can cause build up of minute marker pigment
particles on the dot screen. These can be easily removed
by wiping with a wet cloth. Make sure the dot screen is
completely dry before using it. Wiping the dot screen with
a wet cloth is recommended at least once a week. If there
are metal particles or other foreign matter adhering to the
magnetic surface on the back of the dot screen, roll the dot
screen on to the roller bit by bit on and wipe its surface to
remove the foreign matter. This makes it possible to clean
the back of the screen without creating wrinkles.
•
Do not wipe the dot screen with thinner or benzene. Doing so
can cause deterioration of the dot screen surface and cause
non-uniformity of the projected image.
•
To write on the dot screen, use a commercially available oil
base alcohol type pigmented ink markers.
•
Use any one of the following items to erase text and other
figures written on the dot screen with a commercially
available pen.
–
The provided melamine foam eraser, or a commercially
available melamine type white board eraser
•
If an eraser does not completely remove markings, wipe the
dot screen with a cloth moistened with water.
•
To clean the supplied melamine foam eraser, remove the
cloth/sponge part from the plastic case and wash it in a
solution of water and a neutral detergent. After washing,
allow the cloth/sponge part to dry thoroughly before using it
again.
Anoto and the Anoto logotype are trademarks of Anoto
●
Group AB (Sweden).
"Bluetooth" is the trademark of Bluetooth SIG, Inc.
●
Other company and product names may be registered
●
trademarks or trademarks of their respective owners.
The contents of this manual are subject to change without
●
notice.
Copying of this manual, either in part or its entirety, is
●
forbidden. You are allowed to use this manual for your
own personal use. Any other use is forbidden without the
permission of CASIO COMPUTER CO., LTD.
CASIO COMPUTER CO., LTD. shall not be held liable for
●
any lost profits or claims from third parties arising out of the
use of this product or this manual.
CASIO COMPUTER CO., LTD. shall not be held liable
●
for any loss or lost profits due to loss of data caused by
malfunction or maintenance of this product, or due to any
other reason.
Advertisement
