Troubleshooting Tips - GE JVB37 Owner's Manual & Installation Instructions

Before you call for service...

Troubleshooting Tips

Save time and money! Review the chart below first
and you may not need to call for service.
Problem
Fan does not work
Vent does not rise
18
Possible Causes
The vent is not fully extended.
The blower control switch
may be in the OFF position.
Vent not plugged into an outlet. • Plug vent into a 120V power outlet.
Raise/Lower switch did not
engage lift motor.
Circuit breaker may have
tripped.
Remote switch not plugged in.
What To Do
• Press the Raise/Lower switch.
• Slide it to the right.
• Hold switch down for a couple of seconds to
activate motor.
• Check circuit breaker. Reset if necessary.
• Check all connections between the remote switch
and vent body.