Sanyo DVR-HT120 Instruction Manual
Hide thumbs Also See for DVR-HT120:

Advertisement

INSTRUCTION MANUAL
Recordable DVD
Home Theatre System
TIMER
CLEAR
RETURN SELECT
TRIM
TEST
SOUND
FUNCTION
LEVEL
SURROUND
TV
VOL
MUTE
CH/INPUT
SYSTEM
DISC
MENU
MENU
OK
EDIT
DISPLAY
REC
REC MODE PAUSE
PREV
NEXT
R.SLOW F.SLOW
F.REV
F.FWD
TV/DVD
ZOOM
T/C
PLAY MODE
DVR-HT120
Powered subwoofer: ASX-HT120W
Front speakers: SX-HT120F
Centre speaker: SX-HT120C
Rear speakers: SX-HT120R
Problems with set-up?
Call 0870 240 7475
Calls cost a maximum of 8p per
minute during peak periods,
based on BT rates of April 2004

Advertisement

Table of Contents
loading

Summary of Contents for Sanyo DVR-HT120

  • Page 1 INSTRUCTION MANUAL Recordable DVD DVR-HT120 Home Theatre System Powered subwoofer: ASX-HT120W Front speakers: SX-HT120F Centre speaker: SX-HT120C Rear speakers: SX-HT120R TIMER CLEAR RETURN SELECT TRIM TEST SOUND FUNCTION LEVEL SURROUND MUTE CH/INPUT SYSTEM DISC MENU MENU EDIT DISPLAY REC MODE PAUSE...
  • Page 2 Do not remove the back cover with mains connected. This set complies with the EMC Directive 89/336 and with the LVD Directive 73/23. Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused.
  • Page 3: Remote Control

    CONTROLS TIMER CLEAR RETURN SELECT TRIM TEST SOUND FUNCTION LEVEL SURROUND MUTE CH/INPUT SYSTEM DISC MENU MENU EDIT DISPLAY 1. Standby button and indicator (STANDBY) (z) Remote control 2. Surround button (SURROUND) Amplifier (Powered subwoofer) controls 3. Function button (FUNCTION) 1.
  • Page 4: Speaker Connections

    CONNECTIONS Note: Do not connect the mains lead to an AC outlet until all connections have been made. Please refer to the instruction manuals for the equipments that you are connecting (DVD recorder, TV, VCR, etc.). When you connect the unit to your TV and other equipment, be sure to turn off the power and disconnect all of the equipments from the AC outlet until all the connections have been made.
  • Page 5: Speaker Placement

    Speaker Placement Front right speaker Centre speaker Front left speaker Surround right speaker Subwoofer Surround left speaker Centre speaker The centre and front left/right speakers have built-in magnetic stray field Front left speaker Front right speaker compensation. They may be placed close to a TV without affecting the colour purity.
  • Page 6: Connecting The Mains Lead

    Connecting to the DVD Recorder DVD recorder (DVR-S120) Before connecting, remove the protective cap from the socket. Replace the cover when the socket is not in use. Also, remove the protective cap on the optical lead plug. Optical lead Powered subwoofer (ASX-HT120W) If your equipment has a coaxial digital audio output socket, use the COAXIAL DIGITAL AUDIO IN socket.
  • Page 7: Operation

    OPERATION In the CO (Coaxial)/OP (Optical) function: Either the main unit or remote control can be operated. However, If the signal is encoded with Dolby Digital 5.1 channel surround sound: for convenience, this instruction manual explains operation using s D (Dolby Digital) the remote control.
  • Page 8: Adjusting The Speaker Volume Balance

    Adjusting the speaker volume balance Adjusting the delay time (Using the main unit only) This unit is set to the standard level before shipping from the factory. You The sound from speakers can reach the listening position at different times may not need adjustment.
  • Page 9: Troubleshooting

    Sleep timer operation (Using the main unit only) To check the remaining sleep time Press [SOUND] once. After several seconds, the “MENU ON” status The sleep timer automatically switches off the power after a preset time returns. has elapsed. There are 5 time periods available: 15, 30, 45, 60 and 90 minutes.
  • Page 10: Specifications

    SPECIFICATIONS Powered subwoofer (ASX-HT120W) Front speaker (SX-HT120F) Output power System: Closed Front/Centre/Rear: 100W/ch (at 3Ω,1kHz,10%T.H.D.,1 channel driven) Unit: 5cm Cone type x6 (magnetic shield) Subwoofer: 100W (at 3Ω,100Hz,10%T.H.D.,1 channel driven) Impedance: 3Ω Input connections Dimension (WxHxD): 140 x 465 x 140mm Analogue input sensitivity: AUX1 500mV/47kΩ...
  • Page 11 MEMO...
  • Page 12 (UK) 1AD6P1P2138-- SANYO Electric Co., Ltd.

This manual is also suitable for:

Asx-ht120wSx-ht120fSx-ht120cSx-ht120r

Table of Contents