Provisioning Set-Up - Cisco Codec C Series Getting Started Manual

Cisco TelePresence Video Systems
Contents

Provisioning set-up

(When using a provisioning system)
If in doubt for any of the parameters below, contact your
provisioning system provider.
See the administrator guide for your product, to find more
information about the provisioning settings.
Select provisioning infrastructure
1. Go to the Configuration tab, and click
2. Open the Provisioning settings from the left column.
3. Select a provisioning infrastructure from the
down list:
• TMS – Cisco TelePresence Management System
• VCS – Cisco Video Communication Server
• Callway –WebEx Telepresence
• CUCM – Cisco Unified Communications Manager
• Auto - The system starts provisioning by first trying VCS,
then TMS and finally CUCM.
• Edge - Cisco UCM via Expressway
If you select Off, all configurations must be set manually on the
video system.
If you are changing a value setting,
you have to always click save to confirm the change.
Back to task overview
D14639.12 Video Systems Getting Started Guide TC7.0, DECEMBER 2013.
Introduction User interfaces
Set the required provisioning parameters
Which parameters to set depend on which infrastructure was selected.
TMS
1. It may be required to authenticate the video system with
Cisco TMS. If so, enter
respective input fields.
System Configuration.
2. Enter the IP address or DNS name of the Cisco TMS server
in the Address
heading.*
Mode drop
3. Enter the
ing input field.
VCS
1. It may be required to authenticate the video system with
the Cisco VCS. If so, enter
respective input fields.
2. Enter the IP address or DNS name of the Cisco VCS in the
Address
3. Enter the SIP
ing input field.
Have a look at the
information about VCS provisioning.
CUCM
Enter the IP address or DNS name of the UCM provisioning
server in the
heading.*
You can find more details about setting up Cisco UCM provi-
sioning in the
Confirguration Configuration
LoginName and Password
input field under the ExtermalManager
Path to the provisioning service in the correspond-
LoginName and Password
input field under the ExtermalManager heading.
Domain for the Cisco VCS in the correspond-
Cisco VCS provisioning appendix for more
Address input field under the ExtermalManager
Administering TC endpoints on CUCM
24
Appendices
Cisco UCM via Expressway
Upon ordering the Cisco UCM via Expressway service, you have
received a username and password.
in the
1. Enter the username in the
name is in the form user@your.edge.domain.
2. Enter the password in the
In some cases, you must manually enter the Expressway
address. Enter the address you have received upon ordering
in the Address input field under the
WebEx Telepresence (formerly Callway)
Upon ordering the Cisco WebEx Telepresence service, you have
in the
received a Video number and an
If you do not have a video phone number and an activation code,
contact your company's WebEx Telepresence administrator.
1. Enter the Video number in the
Enter the Activation code in the
guide.
* The DHCP server can be set up to provide the External Manager address
automatically (Option 242 for TMS; Option 150 for UCM). Any input set up
here overrides the setting provided by DHCP.
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Contacts
LoginName input field. The user
Password input field.
ExternalManager heading.
Activation code.
LoginName input field.
Password input field.