Machine Information; Checking The Serial Number; Checking The Firmware Version; Reset Functions - Brother DCP-J152W User Manual

Machine Information

Checking the serial number

a
Press Menu.
b
Press a or b to choose Machine Info.
Press OK.
c
Press a or b to choose Serial No.
Press OK.
Your machine's serial number will
appear on the LCD.
d
Press Stop/Exit.
Checking the firmware
version
a
Press Menu.
b
Press a or b to choose Machine Info.
Press OK.
c
Press a or b to choose Version.
Press OK.
Your machine's firmware version will
appear on the LCD.
d
Press Stop/Exit.

Reset functions

B
The following reset functions are available:
1 Machine Reset
B
You can reset all the machine's settings
that you have changed, such as the Date
and Time.
2 Network
You can reset the print server back to its
default factory settings. Network Reset
will affect the password and IP address
information.
3 All Settings
You can restore all settings to the factory
setting.
Brother strongly recommends performing
this procedure before handing over or
B
disposing of the machine.

How to reset the machine

a
Press Menu.
b
Press a or b to choose
Initial Setup.
Press OK.
c
Press a or b to choose Reset.
Press OK.
d
Press a or b to choose the type of reset
(Machine Reset, Network or
All Settings) you want to use.
Press OK.
Press + to confirm.
e
Press + to reboot the machine.
Troubleshooting
B
B
59
B