Running - Husqvarna P-ZT 48 Operator's Manual

Running

1. Release the parking brake by moving the lever
downward.
NOTE: The mower is equipped with an operator
presence system. When the engine is running,
any attempt by the operator to leave the seat
without first setting the parking brake will shut off
the engine.
2. Move the steering controls to the neutral position
(N).
3. The cutting height can be set from 1"- 5½"
(2.5 cm-14 cm) by setting the cutting height pin
into the desired hole. Release deck height control
by pushing forward on the pedal.
4. Set pin at desired cutting height. (Pin is removed
by rotating 180 .) Push pedal again to lower deck
O
to selected setting.
oPeRatIon
Release the parking brake
Deck lift pedals
Set deck to selected cutting height
8065-006
8065-087
8065-090
31