Dvd surround system; dvd/cd receiver; speaker system (278 pages)
Summary of Contents for Pioneer X-HM70DAB-K
Page 1
X-HM70DAB NETWORK CD RECEIVER SYSTEM XC-HM70DAB NETWORK CD RECEIVER http://www.pioneer.co.uk (or http://www.pioneer.eu). Discover the benefits of registering your product online at Operating Instructions...
Page 2
VENTILATION CAUTION IMPORTANT When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation CAUTION (at least 10 cm at top, 10 cm at rear, and 10 cm at each RISK OF ELECTRIC SHOCK side).
Page 3
Condensation If the player is moved suddenly from a cold place into a warm room (in winter, for example) or if the temperature in the room in which the player is installed rises suddenly due to a heater, etc., water droplets (condensation) may form inside (on operating parts and the lens).
Thank you for purchasing this PIONEER product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your PIONEER product. Contents X-HM70DAB Network CD Receiver System consisting of Playback with NETWORK feature ... 20 main unit and speaker system.
• Use the unit on a firm, level surface free from vibration. PIONEER will not be held responsible for any damage • Place the speakers at least 30 cm away from any CRT TV resulting from use of this unit with a voltage other than to avoid colour variations across the TV screen.
Controls and Displays Controls and Displays 1 STANDBY/ON 8 FOLDER +/- Switches the receiver between standby and on (page 11). Use to select the folder of the MP3/WMA disc (page 15). 2 Input function buttons 9 OPEN/CLOSE Use to select the input source to this receiver. Use to open or close the disc tray (page 13).
Controls and Displays 10 USB Terminal Front Panel Speaker system (X-HM70DAB only) Use to connect your USB mass storage device or Apple iPad as an audio source (page 19). 11 Tune Down, Skip Down Button 1 Dome-Tweeter Selects the desired track or folder to be played back. 2 Woofer 12 Tune Up, Skip Up Button 3 Bass Reflex Duct...
Connecting your equipment Connecting your equipment Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. Left Right speaker speaker X-HM70DAB provided speaker wire SPEAKERS Video cable Red tube VIDEO LINE SUBWOOFER ANTENNA PREOUT...
Connecting your equipment • Do not stand or sit on the speakers. You may be injured. Speaker connection Connecting a TV, etc. • The provided speaker wire with the red tube is for the plus Connect to the TV using an audio cable. Using other subwoofer (+) terminal.
When you find it damaged, ask your for WIRELESS LAN Internet (OUTPUT 5 V 0.6 A MAX) LAN (10/100) nearest PIONEER authorized service center or your dealer DC OUTPUT for WIRELESS LAN (OUTPUT 5 V 0.6 A MAX) LAN (10/100) for a replacement.
General control General control 2 Press ENTER button. Display brightness control 3 Use / to set the day, then press ENTER. Press DIMMER button to dims the display brightness. The 4 Use / to select 24-hour or 12-hour display, then brightness can be controlled in four steps.
General control Muting Listening to the playback sounds of portable FM Stereo The volume is muted temporarily when pressing the MUTE audio player, etc. button on the remote control. Press again to restore the 1 Use a connection lead to connect the portable audio volume.
Listening to a CD or MP3/WMA disc Listening to a CD or MP3/ • If TV or radio interference occurs during CD operation, Disc playback move the unit away from the TV or radio. WMA disc 1 Press the STANDBY/ON button to turn the power on. 2 Press the CD button on the remote control or INPUT Various disc functions button repeatedly on the main unit to select CD...
Listening to a CD or MP3/WMA disc • During shuffle play, direct track search is not possible. To shuffle play all tracks: Advanced CD or MP3/WMA disc playback Press the SHUFFLE button on the remote control. To stop playback: To cancel shuffle play: Press the button.
Listening to a CD or MP3/WMA disc 3 Press the ENTER button to save the track number. Displaying disc information: 1 ROOT folder is set as folder 1. Press CD DISP repeatedly to change to the display of the 4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can 2 Playback will be in the order of the diagram below.
Page 16
Listening to a CD or MP3/WMA disc • Title, Artist and Album name are displayed if they are Procedure to playback MP3/WMA disc with folder recorded on the disc. mode on • In case of playback with the folder mode on, press FOLDER +/-, and the folder can be selected even though it is in playback/pause mode.
• Installing software versions other than indicated on the the front-back directions of the Universal dock adapter website of Pioneer to your iPod/iPhone/iPad may result in correctly. To attach, first place the protruding tabs on the incompatibility with this system.
Listening to the iPod, iPhone or iPad 2 Connect the iPad to the unit via USB connector. • Press iPod/iPhone to switch the remote control to the Playing back files stored on an iPod iPod/iPhone operation mode. To navigate songs on your iPod, you can take advantage of the OSD of your TV connected to this receiver.
Playing a USB device Important • Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no responsibility for any loss of data that may occur when connected to this receiver.
Playback with NETWORK feature Playback with NETWORK 2 Switch the TV input so that it connects to the receiver. Listening to Internet radio stations 3 Press NETWORK on the remote control to switch the receiver to the NETWORK function. feature Internet radio is an audio broadcasting service transmitted It may take several seconds for this receiver to access the via the Internet.
Playback with NETWORK feature 2 Use / to select audio file or Internet radio station, 1 Select ‘Network’ from the Settings menu. Playing back audio files stored on and then press ENTER. 3 Use / to select playback or delete options and then Settings Network Settings components on the network...
Playback with NETWORK feature IP (IP address) • About – Displays the MAC address of this receiver. DLNA The IP address to be entered must be defined within the following ranges. If the IP address defined is beyond the Network connection requirements following ranges, you cannot play back audio files The NETWORK allows you to play music on media servers stored on components on the network or listen to...
Windows Media formatted content. Using connection may be blocked. an application unauthorized by Microsoft Corporation is Pioneer is not responsible for any malfunction of the player subject to malfunction. and/or the NETWORK features due to communication error/...
Listening to the FM radio Listening to the FM radio Improving FM sound Listening to station presets If the indicators don’t light when tuning to an FM You will need to have some presets stored to do this. See The following steps show you how to tune in to FM radio station because the signal is weak, set the receiver to the Saving station presets above if you haven’t done this already.
Using the Radio Data System (RDS) Using the Radio Data Displaying RDS information Use the DISPLAY button to display the different types of RDS System (RDS) information available. Press DISPLAY for RDS information. Each press changes the display as follows: An introduction to RDS •...
Listening to the DAB Listening to the DAB While the primary service is selected, brackets < > are displayed. While the secondary service is selected, brackets ( ) are displayed. DAB (Digital Audio Broadcasting) is a digital transmission system where audio signals are converted to digital signals for broadcasting.
Listening to the DAB Audio Mode Component Reset Displays the station’s audio mode (stereo or mono). Deletes all the stations. While “Reset: Yes?” appears, press the ENTER button. After “Resetting...” disappears, unplug the AC Power lead DAB Stereo and wait for 5 seconds or more. Frequency Displays the frequency of the current multiplex.
Timer and sleep operation Timer and sleep operation The timer can be set as follows. Sleep operation EVERYDAY SUNDAY MONDAY TUESDAY WEDNESDAY THURSDAY Press SLEEP to change the amount of time before the FRIDAY SATURDAY MON-FRI receiver switches into standby (30 min. – 60 min. – 90 Setting the wake-up timer min.
If something is wrong with this product, check the following Internet security software is currently installed in the DAB reception is poor. before calling your authorized PIONEER dealer or service connected component. There are cases where a component Check the connections, and adjust the location and position centre.
Page 30
Additional Information The component connected to the network does not permit file The broadcasts from an Internet radio station are stopped or - The wireless LAN converter must be set in order to establish sharing. Try changing the settings for the component interrupted.
Additional Information settings will not necessarily improve the wireless LAN If such a problem occurs, do the following: • Do not write on either side of the disc, particularly the environment. Be careful when changing the settings. non-label side from which signals are read. Do not mark 1 Set the unit to the stand-by mode and turn the power ...
Additional Information Category Extension Stream About playable music file formats FLAC .flac FLAC Sampling frequency 44.1 kHz, 48 kHz, 96 kHz The USB and NETWORK function of this receiver supports the following music file formats. • Note that some file formats are not available for playback although they are listed as Quantization bitrate 16 bit, 24 bit playable file formats.
Weight ........4.7 kg Specifications Speaker (X-HM70DAB only) As part of our policy of continuous improvement, PIONEER Type reserves the right to make design and specification changes 2-way type speaker system for product improvement without prior notice.
The PNG Reference Library is supplied “AS related to OpenSSL please contact openssl- Randers-Pehrson, and are distributed Pioneer does not represent or OR SERVICES; LOSS OF USE, DATA, OR subject to the following conditions: IS”. The Contributing Authors and Group core@openssl.org.
Page 35
By contrast, the GNU General this list of conditions and the following 0. This License applies to any program or – DirectFB (c) Copyright 2001-2007 The http://www.oss-pioneer.com/homeav/AVR OpenSSL PROJECT “AS IS” AND ANY Public License is intended to guarantee disclaimer in the documentation and/or other work which contains a notice DirectFB Organization (directfb.org)
Page 36
Additional Information 2. You may modify your copy or copies of 3. You may copy and distribute the your rights under this License. made generous contributions to the PROVIDE THE PROGRAM “AS IS” This program is distributed in the hope that the Program or any portion of it, thus Program (or a work based on it, under However, parties who have received...
Page 37
Additional Information [This is the first released version of the Finally, software patents pose a constant The precise terms and conditions for the notices that refer to this License and Thus, it is not the intent of this section to However, linking a “work that uses the Lesser GPL.
Page 38
Additional Information with the complete machine-readable License, and distribute such a cannot distribute so as to satisfy does not specify a license version END OF TERMS AND “work that uses the Library”, as object combined library, provided that the simultaneously your obligations under number, you may choose any version CONDITIONS code and/or source code, so that the...