Table of Contents
Advertisement
Using external equipment
Viewing an image from a computer
Connecting a computer
Use the PC terminals to connect a computer.
A
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 67 for a list of computer signals compatible with the Plasma Display TV.
Signal names for 15-pin mini D-sub connecter
5
4
3
2
1
10
9
8
7
15 14
13
12
11
A
• Macintosh adaptor may be required for use for some Macintosh computers.
E-51
AVC System (front view)
Pin No.
1
6
2
3
4
5
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
RGB cable
(commercially available)
ø 3.5 mm stereo minijack cable
(commercially available)
Signal name
Pin No.
6
R
7
G
8
B
9
Not connected
0
CSYNC
Displaying an image from a computer
When connecting to a computer, the correct input
signal type is automatically detected.
If the computer image does not come in clearly, you
may need to set the Auto Sync. adjustment on the "Auto
Sync." in the menu. (See page 53.)
You only need to select the input source on the "INPUT
SOURCE" menu.
To view an image from a computer, select "PC" from
the "INPUT SOURCE" menu using b on the remote
control unit or INPUT on the Plasma Display. (See page
54.)
A
• Each time b is pressed, the input source toggles.
• PC INPUT terminals cannot be used for audiovisual
equipment.
Computer
Signal name
Pin No.
q
GND (Ground)
w
GND (Ground)
e
GND (Ground)
r
5V
t
GND (Ground)
Signal name
Not connected
SDA
HD
VD
SCL
Advertisement
Table of Contents
