Advertisement
The power indication light (green) will be illuminated.
3.) Turn off the device by pressing the ON/OFF button again after the treatment is finished. The
power indication light (green) will be turn off.
4.) Remove the battery pack by sliding it in counter direction.
Charging the battery (option)
The battery can be charged with either the AC/DC adapter or the DC car adapter.
1.) Remove the battery from the device. (Battery will not be
charged when it is attached to the compressor system.)
2.) Recharge the battery by inserting plug of the AC/DC
adapter (or DC car adapter). The minimum charging time
is about 3~5 hours.
3.) The battery status indicator will illuminate amber during
the charging operation and turn green when fully charged.
Note:
a. For a new rechargeable battery, the first charge shall be no less than 8 hours.
b. Disconnect the battery from the main unit when not using for a long period of time.
c. The battery should always be stored FULLY CHARGED in a cool dry place.
d. Charge the battery continually to maintain maximum battery capacity.
Warning:
To prevent the hazard of short circuit. DO NOT use any
metal or conductor to connect the electrodes on the battery.
Battery Status Indicator
Green :
Amber :
Amber (Blinking):
Amber & Green (Blinking): Bad Battery (Need to be replaced.)
8
Fully charged
Normal charging
Protective charging
Advertisement
