1. Manuals
  2. Brands
  3. JETWAY Manuals
  4. Motherboard
  5. Kocab 18G
  6. User manual

JETWAY Kocab 18G User Manual

M/b for socket-a athlon/duron processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
M/B For Socket-A Athlon/Duron Processor
Trademark:
*
Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.
Kocab 18G/Kocab 18P
USER'S MANUAL
Release date: July 2003
NO. G03-NF18G5A

Advertisement

Table of Contents
loading

Related Manuals for JETWAY Kocab 18G

Summary of Contents for JETWAY Kocab 18G

  • Page 1 Kocab 18G/Kocab 18P USER'S MANUAL M/B For Socket-A Athlon/Duron Processor NO. G03-NF18G5A Release date: July 2003 Trademark: Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

  • Page 2: Table Of Contents

    TABLE OF CONTENT USER’S NOTICE ......................1 MANUAL REVISION INFORMATION ................1 COOLING SOLUTIONS ....................1 CHAPTER 1 INTRODUCTION OF Kocab 18G/Kocab 18P MOTHERBOARD 1-1 FEATURE OF MOTHERBOARD................2 1-2 SPECIFICATION .....................3 1-3 PERFORMANCE LIST ...................4 1-4 LAYOUT DIAGRAM & JUMPER SETTING ............5 CHAPTER 2 HARDWARE INSTALLATION 2-1 HARDWARE INSTALLATION STEPS ..............8...

  • Page 3: User's Notice

    TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF MANUFACTURER. THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE Kocab 18G/Kocab 18P MOTHER- BOARD AND WE DO ASSURE THIS MANUAL MEETS USER’S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE.

  • Page 4: Chapter 1 Introduction Of Kocab 18G/Kocab 18P Motherboard

    This will monitor and protect your computer. In Kocab 18G/Kocab 18P we design in CPU Vcore Voltage, DDR memory 2.5V Voltage, AGP 1.5V Voltage those can minor adjustable in BIOS setup. This design can let users approach over clock demand and also can make system more stable.

  • Page 5: Performance List

    ∗ ATX form factor 4 layers PCB size: 30.5x24.5cm Design ∗ nVIDIA nForce2 Integrated Graphics Processor (IGP) Chipset north bridge for Kocab 18G ∗ nVIDIA nForce2 System Platform Processor (SSP) north bridge for Kocab 18P ∗ nVIDIA nForce2 Media and Communications Processor–Turbo (MCP2-T) south bridge ∗...
  • Page 6 228.3 232.3 DEMO2 233.7 228.5 232.7 Return to Castle Wolfenstein 124.7 121.7 123.8 WCPUID System / CPU Clock 167.05 / 2171.60 167.05 / 2171.60 167.05 / 2171.60 Performance Test Report (for Kocab 18G) CPU: AMD Athlon XP 3000+ (FSB 166MHZ)

  • Page 7: Layout Diagram & Jumper Setting

    512MB DDR400 X1 (Winbond DDR W942508BH-5) DRAM: 256MB DDR400 X1 (Winbond DDR W942508BH-5) VGA Expansion Card: ATI 9700 PRO (1024x768x32bit color) Hard Disk Driver: IBM IC35L040AVVN07-0 (ATA-100 7200RPM) BIOS: Award Optimal default Win XP Professional 166/166 166/166 Dual Channel 3D Mark 2001SE 2934 4390 3D Mark 2003...
  • Page 8 PRINT PS/2 Mouse LINE-IN PS/2 Keyboard LINE-OUT VGA/COM2A COM1 USB1 (Option) VGA (for Kocab 18G) COM2A (for Kocab 18P) K/B Power ON Jumper (JP1) CPU Socket CPU FAN PS2 KB/Mouse Port PC99 Back Panel DDR DIMM X3 COM2 Connector (for Kocab 18G)

  • Page 9: Expansion Sockets

    DDR SDRAM 184-pin DDR SDRAM Module P.11 Module Socket Expansion Socket PCI1, PCI2, PCI3, PCI Slot 32-bit PCI Local Bus Expansion slots P.12 PCI4, PCI5, PCI6 AGP 4X/8X Mode Slot AGP Expansion Slot P.13 Only for Kocab 18G Chapter 2...

  • Page 10: Chapter 2 Hardware Installation

    Hardware installation 2-1 Hardware installation Steps Before using your computer, you had better complete the following steps: 1. Check motherboard setting 2. Install CPU 3. Install Memory 4. Install Expansion cards 5. Connect Ribbon cables, Panel wires, and power supply 6.

  • Page 11: Install Cpu

    A battery must be used to retain the motherboard configuration in CMOS RAM short 1-2 pins of JP8 to store the CMOS data. To clear the CMOS, follow the procedure below: Turn off the system and unplug the AC power Remove ATX power cable from ATX power connector Locate JP8 and short pins 2-3 for a few seconds Return JP8 to its normal setting by shorting pins 1-2...

  • Page 12: About Amd Athlon & Duron 462-Pin Cpu

    Processor - the "central processing unit" (CPU); the principal integrated circuit used for doing the "computing" in "personal computer" Front Side Bus Frequency - the working frequency of the motherboard, which is generated by the clock generator for CPU, DRAM and PCI BUS. CPU L2 Cache - the flash memory inside the CPU, normally Athlon CPU has 256K or above, while Duron will have 64K.

  • Page 13: Expansion Card

    memory size of 3.0GB DDR SDRAM. For Support 128-bit data transfer function (Dual Channel) must plug both DDR1 & DDR3, DDR2 & DDR3, or DDR1 & DDR2 & DDR3, other combination only support 64-bit data transfer. Valid Memory Configurations Bank 184-Pin DIMM Total Memory Bank 0, 1 (DDR1)

  • Page 14: Assigning Irq For Expansion Card

    3. Align the card’s connectors and press firmly. 4. Secure the card on the slot with the screen you remove above. 5. Replace the computer system’s cover. 6. Set up the BIOS if necessary. 7. Install the necessary software driver for your expansion card. 2-5-2 Assigning IRQs For Expansion Card Some expansion cards need an IRQ to operate.

  • Page 15: Connectors, Headers

    Audio Connector : LINE-OUT/LINE-IN/MIC This Connector are 3 phone Jack for LINE-OUT, LINE-IN, MIC LINE_O : Audio output to speaker LINE_I : Audio input to sound chip Microphone Connector MIC : VGA Connector (15-pin D-Sub) Connector: VGA (for Kocab 18G only)
  • Page 16 VGA is the 15-pin D-Subminiature female connector for display monitor. Serial Port COM1, COM2 : COM1, COM2A (COM2A only for Kocab 18P) COM1, COM2 are the 9-pin D-Subminiature mail connector. The On-board serial port can be disabled through BIOS SETUP. Please refer to Chapter 3 “INTEGRATED PERIPHERALS SETUP” section for more detail information.

  • Page 17: Headers

    (13) Serial ATA IDE Connector (7-pin block): SATA1/ SATA2 This connector support the provided Serial ATA IDE cable for connect the Serial ATA hard disk. Pin 1 SATA2 SATA1 Serial-ATA Port Connector 2-6-2 Headers Serial Port2 COM2 Header (9-pin) : COM2 (only for Kocab 18G)
  • Page 18 COM2 ribbon cable to pin 1 Serial Port2 COM2 Header VGA Port2 Header (15-pin) : VGA2 (only for Kocab 18G) This header is for secondary CRT Display and TV-out the user only can get one display either the CRT2 or the TV-out at the same time.
  • Page 19 Pin 1 GAME Port Header USB Port Header (9-pin) : USB2 The header are used for connecting the additional USB port plug. By attaching an option USB cable, your can be provided with two additional USB plugs affixed to the back panel. USB2 Pin 1 USB Port Headers...
  • Page 20 SPEAK Pin 1 Pin 1 System Case Connections (12) Wake On-LAN Headers (3-pin) : WOL This connector connects to a LAN card with a WAKE ON-LAN output. This connector power up the system when a wake up signal is received through the LAN card. NOTE: This feature requires that Wake On LAN or Ring In Wake up is enabled.

  • Page 21: Starting Up Your Computer

    This connector supports the optional wireless transmitting and receiving infrared module. You must configure the setting through the BIOS setup to use the IR function. Pin 1 IR infrared module Headers (15) CD Audio-In Headers (4-pin) : CDIN CDIN is the connector for CD-Audio Input signal. Please connect it to CD-ROM CD-Audio output connector.
  • Page 22 1. After all connection are made, close your computer case cover. 2. Be sure all the switch are off, and check that the power supply input voltage is set to proper position, usually in-put voltage is 220V∼240V or 110V∼120V depending on your country’s voltage used.

  • Page 23: Chapter 3 Introducing Bios

    Chapter 3 Introducing BIOS The BIOS is a program located on a Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gain control. The BIOS first operates an auto-diagnostic test called POST (power on self test) for all the necessary hardware, it detects the entire hardware device and configures the parameters of the hardware synchronization.

  • Page 24: The Main Menu

    3-3 The Main Menu Once you enter Award  BIOS CMOS Setup Utility, the Main Menu (Figure 3-1) will appear on the screen. The Main Menu allows you to select from fourteen setup functions and two exit choices. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.

  • Page 25: Standard Cmos Features

    Load Optimized Defaults Use this menu to load the BIOS default values that are factory settings for optimal performances system operations. Load Standard Defaults Use this menu to load the BIOS default values for the minimal/stable performance system operation. Set Supervisor/User Password Use this menu to set User and Supervisor Passwords.

  • Page 26: Advanced Bios Features

    The time format is <hour><minute><second>. Primary Master/Primary Slave Secondary Master/Secondary Slave Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category.
  • Page 27 Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. If this function is enabled and someone attempt to write data into this area, BIOS will show a warning message on screen and alarm beep. Disabled (default) No warning message to appear when anything attempts to access the boot sector or hard disk partition table.

  • Page 28: Advanced Chipset Features

    Sets the number of times a second to repeat a keystroke when you hold the key down. The settings are: 6, 8, 10, 12, 15, 20, 24, and 30. Typematic Delay (Msec) Sets the delay time after the key is held down before is begins to repeat the keystroke. The settings are 250, 500, 750, and 1000.

  • Page 29: Integrated Peripherals

    When synchronous DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing. The settings are: 2T and 2.5T. System BIOS Cacheable Selecting Enabled allows caching of the system BIOS ROM at F0000h-FFFFFh, resulting in better system performance.

  • Page 30: Onchip Ide Function

    3-7-1 Onboard IDE Function CMOS Setup Utility – Copyright(C) 1984-2003 Award Software OnChip IDE Function OnChip IDE Channel0 Enabled Item Help OnChip IDE Channel1 Enabled Primary Master Auto Primary Slave Auto Menu Level >> Secondary Master PIO Auto Secondary Slave Auto Primary Master UDMA...

  • Page 31: Onchip Device Function

    3-7-2 Onboard Device Function CMOS Setup Utility – Copyright(C) 1984-2003 Award Software OnChip Device Function Item Help AC97 Sound Device Auto Game Port Address Midi Port Address Disabled Menu Level >> X Midi Port IRQ 1394 ontroller Auto nVIDIA LAN Function Auto USB Host Controller Enabled...

  • Page 32: Power Management Setup

    Onboard FDD Controller Select Enabled if your system has a floppy disk controller (FDD) installed on the system board and you wish to use it. If you install add-on FDC or the system has no floppy drive, select Disabled in this field.

  • Page 33: Pnp/Pci Configuration Setup

    ACPI Function This item allows you to Enabled/Disabled the Advanced Configuration and Power Management (ACPI). The settings are Enabled and Disabled. Video Off Method This determines the manner in which the monitor is blanked. DPMS (default) Initial display power management signaling. Blank Screen This option only writes blanks to the video buffer.

  • Page 34: Irq Resources

    Reset Configuration Data Normally, you leave this field Disabled. Select Enabled to reset Extended System Configuration Data (ESCD) when you exit Setup if you have installed a new add-on and the system reconfiguration has caused such a serious conflict that the operating system can not boot. The settings are: Enabled and Disabled.

  • Page 35: Pc Health Status

    3-10 PC Health Status This section shows the Status of you CPU, Fan, Warning for overall system status. This is only available if there is Hardware Monitor onboard. CMOS Setup Utility – Copyright(C) 1984-2003 Award Software PC Health Status Shutdown Temperature Disabled Item Help Show PC Health in Post...

  • Page 36: Miscellaneous Control

    3-11 Miscellaneous Control This section is for setting CPU Frequency/Voltage Control. CMOS Setup Utility – Copyright(C) 1984-2003 Award Software Miscellaneous Control ** Current Host Clock is Item Help Host Clock at Next Boot is 100MHz ** Current DRAM Clock is DRAM Clock at next Boot is 133MHz Menu Level >...

  • Page 37: Load Standard/Optimized Defaults

    3-12 Load Standard/Optimized Defaults Load Standard Defaults When you press <Enter> on this item, you get confirmation dialog box with a message similar Load Standard Defaults (Y/N)? N Pressing <Y> loads the BIOS default values for the most stable, minimal-performance system operations.

  • Page 38: Chapter 4 Driver & Free Program Installation

    START / click RUN / type X:\SETUP.EXE (assuming X is your CD-ROM drive). From MAGIC INSTALL MENU you may make 12 selections: 1. nFORCE install NVIDIA nForce chipset system driver 2. VGA install NVIDIA VGA driver (for Kocab 18G) 3. SOUND install ALC Audio Codec driver 4. USB2.0 install USB 2.0 driver 5.
  • Page 39 ETHERNET : NVIDIA nFORCE MCP networking 1. Click nFORCE when MAGIC INSTALL 2. Click NEXT when NVIDIA Windows98/ MENU appears ME/2000/XP nForce Drivers Wizard appears Click Finish to restart computer 4-2 VGA install NVIDIA VGA Driver (Only for Kocab 18G)
  • Page 40 1. Click VGA when MAGIC INSTALL MENU 2. Click NEXT When NVIDIA Win95/98/ME/ appears 2000/XP Display Driver Windows appear 3. If You Want Re-start Computer , Click FINISH 4-3 Sound Install ALC650 Audio Codec Driver 1. Click SOUND when MAGIC INSTALL 2.

  • Page 41: Usb

    3. Click Finish and Restart Windows 4. Click Start→Program→Avance Sound Manager→AvRack. Then AVRACK Windows appears 5. Sound Effect select and KaraOK Mode 6. Manual Sound Effect Setting Function Note: The path of the file For WIN98/NT4.0/WIN2K/XP is X:\CODEC\ALC\SETUP.EXE 4-4 USB2.0 Install NVIDIA USB 2.0 Driver Windows 98SE/ME/2000 USB 2.O Driver installation 1.

  • Page 42: Sata Install Promise Ata Ide Controller Driver

    Windows XP USB 2.O Driver installation 1. Install Windows XP Service Pack 1 or later 2. Select My Computer, Press Right Button, Select Properties, Go to Hardware \ Device Manager, Remove Other Device \ Universal Serial Bus (USB) Controller Restart Your Computer, It Will Find “NVIDIA USB2.0 Enhanced Host Controller” And “USB2.0 Root Hub Device”...

  • Page 43: Pc-Cillin Install Pc-Cillin2002 Anti-Virus Program

    4-6 PC-CILLIN Install PC-CILLIN 2002 Anti-virus program 1. Click PC-CILLIN when MAGIC INSTALL 2. (1) Click "Install PC-CILLIN" when PC- MENU appear CILLIN 2002 main menu appears, and Click NEXT when "Install Shield Wizard For PC- CILLIN 2002" (2) Click Open Manual. you can learn PC- CILLIN 2002 how to use 3.
  • Page 44 7. After PC-CILLIN 2002 complete, Please 8. finish register process, we recommend select register your information and get LICENSE update item to download newest engine code KEY from TREND MICRO web site, enter and virus code your license key and click FINISH Note : Please install ACROBAT READER, Before you read PC-CILLIN 2002 User Manual, the path at X:\acrobat\ar500eng.exe...

  • Page 45: Mbios Install Bios Live Update Utility

    4-7-1 How To Utilize PC-HEALTH 1. Click Program → Winbond Hardware Doctor 2. After executing Winbond Hardware Doctor it → Hardware Doctor the Winbond Hardware supports system voltage, Fan speed and Doctor will appears CPU/SYSTEM Temperature. Because this is You can remove the Utility in Control Panel a On-time Monitoring program therefore the →...
  • Page 46 3. After finish Setup you will have a Magic 4. Double click the Magic BIOS icon you will BIOS icon in your screen have this picture, choose from internet you can upgrade BIOS On-line 5. When On-line update BIOS the program will 6.

  • Page 47: How To Update Bios

    Copy utility program to your boot disc. You may copy from DRIVER CD X:\FLASH\AWDFLASH.EXE or download from our web site. STEP 3. Copy latest BIOS for Kocab 18G/Kocab 18P from our web site to your boot disc. STEP 4. Insert your boot disc into A:, start the computer, type “Awdflash A:\Kocab18GAxxx.BIN /SN/PY/CC/R”...

This manual is also suitable for:

Kocab 18p

Table of Contents