Ejecting A Disc In An Emergency - Yamaha CRW2200IX Series Owner's Manual

Notes
• It may not be possible to open the disc tray while a disc is being read or written.
• Remove the disc only after the disc tray has opened fully. Otherwise, you risk damaging the
drive or the disc.

Ejecting a Disc in an Emergency

If the disc tray fails to open for some reason, such as a malfunction of the internal
spring-loaded mechanism or power outage, it can be opened manually.
You should attempt to eject a disc manually only as a last resort.
Malfunctions may occur if you do this too frequently.
1 1 1 1 Shut down the computer and the CRW2200IX drive.
2 2 2 2 Find a pin-like tool with a diameter of 2 mm or less to fit through the
manual eject hole on the drive's front panel.
Note
A straightened large paper clip is ideal for this purpose.
3 3 3 3 Push the tool gently into the manual eject hole until the spring-loaded
mechanism ejects the disc tray and disc.
4 4 4 4 Turn on the CRW2200IX drive to close the disc tray.
Manual eject hole
Paper clip
Operation
22