Customising The Audio Source Setting; Audio Adjustments; Introduction To Audio Adjustments; Using The Equaliser - Pioneer AVIC-X1BT Operation Manual

Customising the Audio Source Setting

Various settings are available with the audio
source according to your audiovisual requests.
This chapter describes the methods of changing
the various settings and how to set of the LCD
panel.

Audio Adjustments

Introduction to audio adjust-
ments
(1)
(1) Audio display
Shows the audio function names.
➲ How to display the AUDIO menu ➞ Page 62
If EQ-EX function has been selected and only
when EQ-EX is turned on and CUSTOM is
selected as the equaliser curve, you can switch to
BASS and TREBLE.
Only when the subwoofer controller setting is
PREOUT FULL, NON FADING will be dis-
played instead of SUB WOOFER.
➲ Setting the rear output and subwoofer control-
ler ➞ Page 107
When selecting the FM tuner as the source, you
cannot switch to "SLA".

Using the equaliser

The equaliser lets you adjust the equalisation to
match vehicle interior acoustic characteristics as
desired.
Recalling equaliser curves
There are six stored equaliser curves which you
can easily recall at any time. Here is a list of the
equaliser curves:
Equaliser curve
POWERFUL
POWERFUL is a curve in which low-pitched and
high-pitched sounds are boosted.
NATURAL
NATURAL is a curve in which low-pitched and high-
pitched sounds are slightly boosted.
VOCAL
VOCAL is a curve in which the midrange, which is
the human vocal range, is boosted.
CUSTOM
CUSTOM is an adjusted equaliser curve that you
create.
FLAT
FLAT is a flat curve in which nothing is boosted.
SUPER BASS
SUPER BASS is a curve in which only low-pitched
sound is boosted.
1
Press the EQ button to select the equal-
iser.
Press the EQ button repeatedly to switch
between the following equalisers:
POWERFUL — NATURAL — VOCAL —
CUSTOM — FLAT — SUPER BASS
❒ CUSTOM is an adjusted equaliser curve
that you create.
❒ A separate CUSTOM curve can be cre-
ated for each source. If you make adjust-
ments, the equaliser curve settings will be
memorised in CUSTOM.
❒ When FLAT is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equaliser
curves by switching alternatively between
FLAT and a set equaliser curve.

Using balance adjustment

You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
Chapter 8
101