Standing Installation - Panasonic AW-HE2P Operating Instructions Manual

3
Fix the camera to the stand.
1) Put the stand cover on the middle ring portion.
2) Loosen the horizontal fixing screw and insert the stand into the stand mounting hole.
3) Tighten the horizontal fixing screw and fix the camera to the stand.
≥ Tightening torque: 1.176 N·m (12 k
≥ Attach the camera securely with a prescribed tool.
≥ Adjust the horizontal orientation of the camera before fixing.
≥ Tilt the camera horizontally and vertically as necessary for use. (l 10)

Standing Installation

Mount the stand/stand cover to the camera and install it. (l 10)
≥ If you want to fix the stand, screw the stand to the
installation surface with the M4 screws (supplied), and then
mount the stand cover and the camera to the stand.
j Tightening torque: 1.176 N·m (12 k
≥ Place the unit such that it is horizontal to the installation surface.
≥ Install the unit in a stable location where there is no vibration.
Vibration of the installation location causes image vibration.
≥ When installing the camera, take care that it does not fall, etc.
≥ Take care that the connected cables do not catch on something.
If they do it may cause a fall or injury.
22
VQT4N15
g
f·cm)
g
f·cm)