Set The Handset's Ringtone Volume; Silent Mode - Philips D700 Extended User Documentation

15 Sound settings
Set the handset's ringtone
volume
You can select among 5 ringtone volume levels.
1
Select [Menu] >
press [OK] to confirm.
2
Select a volume level, then press [OK] to
confirm.
» The setting is saved.
Tip
•
When you turn the ringtone off,
screen.
Set the handset's ringtone
You can select from 10 ringtones.
1
Select [Menu] >
press [OK] to confirm.
2
Select a ringtone, then press [OK] to
confirm.
» The setting is saved.

Silent mode

You can set your phone to silent mode and
enable it for a specific duration when you do
not want to be disturbed. When the silent
mode is turned on, your phone does not ring
or send any alerts or sound.
Note
•
When you press to find your handset, or when you
activate the alarm, your phone still sends alert even
when the silent mode is activated.
30 EN
> [Ring volume], then
displays on the
> [Ring Tone], then
1
Select [Menu] >
press [OK] to confirm.
2
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.
3
Select [Start & end], then press [OK] to
confirm.
4
Set the time, then press [OK] to confirm.
» The setting is saved.
Note
•
When the silent mode is set to [On],
is displayed during the preset time for the silent
mode.
Exclude the contacts from silent
mode
You can select the length of ring delay and
set the contacts to be excluded from the
phonebook. Ring delay is the number of rings
that will be muted before the rings become
audible on the phone.
1
Select [Menu] >
press [OK] to confirm.
2
Select [Exception].
3
Select [On] to activate, or [Off] to
deactivate the silent mode, then press
[OK] to confirm.
4
Select [Ring delay], then select an option.
5
press [OK] to confirm.
» The setting is saved.
Note
•
If [Exception] is set to [On] and [Ring delay] option
is selected, the handset rings only after length of ring
delay selected is reached.
•
Make sure that the contact under the [Set exception]
option of the phonebook menu is set to [On] before
you can exclude this contact from the silent mode.
> [Silent mode], then
is displayed.
> [Silent mode], then