JVC KW-ADV65BT Firmware Update

The fi rmware for the following products has been updated.
Models: KW-ADV65BT, KW-AV61BT, KW-AV61, KW-AV51
This update the corresponding iPhone App was added.
Update Procedure:
1.
Download the fi rmware update fi le "AV61_NSX_DVD_V0002.zip" and save it on your desktop.
2.
Unzip it on to your desktop.
In the unzipped folder, you will see two fi les "WUGFMU_XS2_51.SWP" and "VUP_info.cds".
3.
Copy these two fi les onto USB fl ash drive. Do not save them into any folder.
4.
Insert USB fl ash drive into the DVD receiver's USB cable. (See fi g1)
5.
On the <Setting> screen, press "System", "down key", and "Enter" of the System Information. (See fi g2)
EN_KW-AV61JJW.indb 24
6.
Press "Update" of the DVD Version to start update. It takes almost two minutes. (See fi g3)
7.
When the update has been completed successfully, "Update Completed" appears and the unit is reset.
8.
After this update, the DVD Version in the System Information will be changed to "0002".
Other instructions please see the instruction manual.

Firmware update

USB cable from the
rear of the unit
G20.00.00
0001
© 2013 JVC KENWOOD Corporation
(fi g1)
(fi g2)
12/11/08 17:07
(fi g3)