Adapter Plugs - GE JE1590 Owner's Manual

ADAPTER PLUGS

Usage situations where appliance's power cord will be disconnected infrequently.
Because of potential safety hazards under certain conditions,
we strongly recommend against the use of an adapter plug. However,
if you still elect to use an adapter, where local codes permit, a
TEMPORARY CONNECTION may be made to a properly grounded
2-prong wall receptacle by the use of a UL listed adapter which
is available at most local hardware stores.
The larger slot in the adapter must be aligned with the larger slot
in the wall receptacle to provide proper polarity in the connection
of the power cord.
CAUTION:
Attaching the adapter ground terminal to the wall receptacle cover screw does not
ground the appliance unless the cover screw is metal, and not insulated, and the wall receptacle is
grounded through the house wiring.
You should have the circuit checked by a qualified electrician to make sure the receptacle is properly
grounded.
When disconnecting the power cord from the adapter, always hold the adapter with one hand. If this
is not done, the adapter ground terminal is very likely to break with repeated use. Should this happen,
DO NOT USE the appliance until a proper ground has again been established.
Usage situations where appliance's power cord will be disconnected frequently.
Do not use an adapter plug in these situations because frequent disconnection of the power cord places
undue strain on the adapter and leads to eventual failure of the adapter ground terminal. You should have
the 2-prong wall receptacle replaced with a 3-prong (grounding) receptacle by a qualified electrician before
using the appliance.
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
SAVE THESE INSTRUCTIONS
www.GEAppliances.com
(Adapter plugs not
permitted in Canada)
Align large
prongs/slots
Ensure proper ground
and firm connection
TEMPORARY
before use.
METHOD
7