HP 6125XLG Configuration Manual page 326

[SwitchC-Vlan-interface400] ospfv3 1 area 2
[SwitchC-Vlan-interface400] quit
# Configure Switch D: enable OSPFv3 and specify the router ID as 4.4.4.4.
<SwitchD> system-view
[SwitchD] ospfv3
[SwitchD-ospfv3-1] router-id 4.4.4.4
[SwitchD-ospfv3-1] quit
[SwitchD] interface vlan-interface 400
[SwitchD-Vlan-interface400] ospfv3 1 area 2
[SwitchD-Vlan-interface400] quit
# Display OSPFv3 neighbors on Switch B.
[SwitchB] display ospfv3 peer
OSPFv3 Process 1 with Router ID 2.2.2.2
Area: 0.0.0.0
-------------------------------------------------------------------------
Router ID Pri State
3.3.3.3 1
Area: 0.0.0.1
-------------------------------------------------------------------------
Router ID Pri State
1.1.1.1 1
# Display OSPFv3 neighbors on Switch C.
[SwitchC] display ospfv3 peer
OSPFv3 Process 1 with Router ID 3.3.3.3
Area: 0.0.0.0
-------------------------------------------------------------------------
Router ID Pri State
2.2.2.2 1
Area: 0.0.0.2
-------------------------------------------------------------------------
Router ID Pri State
4.4.4.4 1
# Display OSPFv3 routing table information on Switch D.
[SwitchD] display ospfv3 routing
OSPFv3 Process 1 with Router ID 4.4.4.4
-------------------------------------------------------------------------
E1 - Type 1 external route,
E2 - Type 2 external route,
*Destination: 2001::/64
Type : IA
Dead-Time Interface
Full/Backup 00:00:40
Dead-Time Interface
Full/DR 00:00:40
Dead-Time Interface
Full/DR 00:00:40
Dead-Time Interface
Full/Backup 00:00:40
IA - Inter area route,
* - Selected route
315
Inst ID
Vlan100 0
Inst ID
Vlan200 0
Inst ID
Vlan100 0
Inst ID
Vlan400 0
I - Intra area route
Cost : 2